Gaelic Football and Hurling Pitch Dimensions

Sports Fields · Soccer, Gaelic and Australian football

Gaelic Football and Hurling Pitch: 130–145 m (427–476 ft) long and 80–90 m (262–295 ft) wide, with a goal 6.5 m (21.33 ft) wide. The plan below is drawn to scale, and the table lists every marking you need to line it.

LLength (field of play)
130–145 m427–476 ft427–476 ft130–145 m
WWidth
80–90 m262–295 ft262–295 ft80–90 m
Goal width (inside posts)
6.5 m21.33 ft21.33 ft6.5 m

Drawing

130–145 m427–476 ft80–90 m262–295 ft
Plan view. Drawn at 140 × 85 m.Drawn to scale

Gaelic Football and Hurling Pitch specifications

LLength (field of play)130–145 m427–476 ft
WWidth80–90 m262–295 ft
Goal width (inside posts)6.5 m21.33 ft
Crossbar height2.5 m8.2 ft

Markings: Gaelic Football and Hurling Pitch

MarkingSize
Lines across the pitch13 m, 20 m and 45 m from each end line
Hurling / camogieadditional 65 m line
Goalposts 6.5 m apart, crossbar 2.5 m high; points over the bar, goals under it

All Sports Fields sizes

Compare all 16 sizes in the Sports Fields chart →

Sources

  1. IFAB: Laws of the Game, Law 1: The Field of Play
  2. NFL: Official Playing Rules, Rule 1: The Field
  3. NCAA: Football Rules and Interpretations, Rule 1
  4. NFHS: Football Rules Book, Rule 1 (field diagram)
  5. CFL: rule and field changes announced 22 Sept 2025 (effective 2027)
  6. World Rugby: Laws of the Game, Law 1: The Ground
  7. RFL: Match Day Operations 2026 (pitch dimensions); International Rugby League Laws of the Game
  8. AFL: Measure out and line mark an Australian Rules oval
  9. MCC: Laws of Cricket, Laws 6 and 7; ICC playing conditions, clause 19 (boundaries)
  10. MLB: Official Baseball Rules, Rule 2.01 and field diagrams
  11. FIH: Rules of Hockey, Playing Area
  12. USA Lacrosse: How to line a men's field (2026)
  13. Government of Western Australia: Sports Dimensions Guide (cross-check for rugby, AFL, Gaelic, hockey, lacrosse, softball)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.