31306 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 313 series (medium, steep angle)
The 31306 is a tapered roller bearing (313 series, medium, steep angle): 30 mm (1.1811 in) bore, 72 mm (2.8346 in) outside diameter and 20.75 mm (0.8169 in) total width. The cone is 19 mm (0.7480 in) wide and the cup 14 mm (0.5512 in).
- dBore diameter
- 30 mm1.1811 in1.1811 in30 mm
- DOutside diameter
- 72 mm2.8346 in2.8346 in72 mm
- TTotal width
- 20.75 mm0.8169 in0.8169 in20.75 mm
Drawing
31306 specifications
| dBore diameter | 30 mm1.1811 in |
|---|---|
| DOutside diameter | 72 mm2.8346 in |
| TTotal width | 20.75 mm0.8169 in |
| BCone width | 19 mm0.7480 in |
| CCup width | 14 mm0.5512 in |
Also known as
31306J2/QHR31306J4T-3130631306-A31306-XL31306JR31306U
Other tapered roller bearings with a 30 mm bore
Same 30 mm bore in other bearing types
6206Ball Bearings6806Ball Bearings6006Ball Bearings7206Angular Contact Bearings7306Angular Contact Bearings3206Angular Contact BearingsNU206Cylindrical Roller BearingsNU306Cylindrical Roller BearingsNU2206Cylindrical Roller Bearings21306Spherical Roller Bearings22206Spherical Roller Bearings1206Self-Aligning Ball Bearings1306Self-Aligning Ball Bearings2206Self-Aligning Ball Bearings51106Thrust Ball Bearings51206Thrust Ball Bearings51306Thrust Ball BearingsNA4906Needle Roller BearingsUC206Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.