31307 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 313 series (medium, steep angle)
The 31307 is a tapered roller bearing (313 series, medium, steep angle): 35 mm (1.3780 in) bore, 80 mm (3.1496 in) outside diameter and 22.75 mm (0.8957 in) total width. The cone is 21 mm (0.8268 in) wide and the cup 15 mm (0.5906 in).
- dBore diameter
- 35 mm1.3780 in1.3780 in35 mm
- DOutside diameter
- 80 mm3.1496 in3.1496 in80 mm
- TTotal width
- 22.75 mm0.8957 in0.8957 in22.75 mm
Drawing
31307 specifications
| dBore diameter | 35 mm1.3780 in |
|---|---|
| DOutside diameter | 80 mm3.1496 in |
| TTotal width | 22.75 mm0.8957 in |
| BCone width | 21 mm0.8268 in |
| CCup width | 15 mm0.5906 in |
Also known as
31307J2/QHR31307J4T-3130731307-A31307-XL31307JR31307U
Other tapered roller bearings with a 35 mm bore
Same 35 mm bore in other bearing types
6007Ball Bearings6207Ball Bearings6307Ball Bearings7007Angular Contact Bearings7207Angular Contact Bearings7307Angular Contact BearingsNU207Cylindrical Roller BearingsNU307Cylindrical Roller BearingsNU2207Cylindrical Roller Bearings21307Spherical Roller Bearings22207Spherical Roller Bearings1207Self-Aligning Ball Bearings1307Self-Aligning Ball Bearings2207Self-Aligning Ball Bearings51107Thrust Ball Bearings51207Thrust Ball Bearings51307Thrust Ball BearingsNA4907Needle Roller BearingsUC207Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.