32020 X Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 320 X series (extra light, wide)
The 32020 X is a tapered roller bearing (320 X series, extra light, wide): 100 mm (3.9370 in) bore, 150 mm (5.9055 in) outside diameter and 32 mm (1.2598 in) total width. The cone is 32 mm (1.2598 in) wide and the cup 24 mm (0.9449 in).
- dBore diameter
- 100 mm3.9370 in3.9370 in100 mm
- DOutside diameter
- 150 mm5.9055 in5.9055 in150 mm
- TTotal width
- 32 mm1.2598 in1.2598 in32 mm
Drawing
32020 X specifications
| dBore diameter | 100 mm3.9370 in |
|---|---|
| DOutside diameter | 150 mm5.9055 in |
| TTotal width | 32 mm1.2598 in |
| BCone width | 32 mm1.2598 in |
| CCup width | 24 mm0.9449 in |
Also known as
HR32020XJ4T-32020X32020-X-XL32020JR32020J2/QHR32020J4T-3202032020-A32020-XL32020U
Other tapered roller bearings with a 100 mm bore
Same 100 mm bore in other bearing types
6020Ball Bearings6220Ball Bearings6320Ball Bearings7020Angular Contact Bearings7220Angular Contact Bearings7320Angular Contact BearingsNU220Cylindrical Roller BearingsNU320Cylindrical Roller BearingsNU2220Cylindrical Roller Bearings22220Spherical Roller Bearings22320Spherical Roller Bearings23120Spherical Roller Bearings1220Self-Aligning Ball Bearings1320Self-Aligning Ball Bearings2220Self-Aligning Ball Bearings51120Thrust Ball Bearings51220Thrust Ball Bearings51320Thrust Ball BearingsNA4920Needle Roller Bearings
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.