7320 Angular Contact Bearing Dimensions
Angular Contact Bearings · 73 series, medium (B 40°)
The 7320 is an angular contact ball bearing (73 series, medium, B 40°). It has a 100 mm (3.937 in) bore, a 215 mm (8.465 in) outside diameter and is 47 mm (1.850 in) wide. Contact angle: 40° (B). The boundary dimensions are the same for every brand and every suffix.
- dBore diameter
- 100 mm3.937 in3.937 in100 mm
- DOutside diameter
- 215 mm8.465 in8.465 in215 mm
- BWidth
- 47 mm1.850 in1.850 in47 mm
Drawing
7320 specifications
| dBore diameter | 100 mm3.937 in |
|---|---|
| DOutside diameter | 215 mm8.465 in |
| BWidth | 47 mm1.850 in |
| αContact angle | 40° (B) |
Also known as
7320B7320BE7320BEP7320BECBP7320BEGAP7320B-2RZ7320AC7320C7320-B-XL-TVP7320-B-XL-MP7320BDB7320BDF7320BDT7320BW7320A
Other angular contact bearings with a 100 mm bore
Same 100 mm bore in other bearing types
6020Ball Bearings6220Ball Bearings6320Ball Bearings30220Tapered Roller Bearings30320Tapered Roller Bearings32020 XTapered Roller BearingsNU220Cylindrical Roller BearingsNU320Cylindrical Roller BearingsNU2220Cylindrical Roller Bearings22220Spherical Roller Bearings22320Spherical Roller Bearings23120Spherical Roller Bearings1220Self-Aligning Ball Bearings1320Self-Aligning Ball Bearings2220Self-Aligning Ball Bearings51120Thrust Ball Bearings51220Thrust Ball Bearings51320Thrust Ball BearingsNA4920Needle Roller Bearings
All Angular Contact Bearings sizes
Compare all 103 sizes in the Angular Contact Bearings chart →
Sources
- ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
- DIN 628-1 / DIN 628-3: Angular contact ball bearings, single row and double row
- SKF: Angular contact ball bearings, product tables (72 BE, 73 BE, 32 A, 33 A)
- Schaeffler (FAG) medias: 72-B, 73-B, 32-B, 33-B angular contact ball bearings
- NSK: Rolling bearings catalogue (CAT. E1102), angular contact ball bearings
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.