32214 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 322 series (light, wide)
The 32214 is a tapered roller bearing (322 series, light, wide): 70 mm (2.7559 in) bore, 125 mm (4.9213 in) outside diameter and 33.25 mm (1.3091 in) total width. The cone is 31 mm (1.2205 in) wide and the cup 27 mm (1.0630 in).
- dBore diameter
- 70 mm2.7559 in2.7559 in70 mm
- DOutside diameter
- 125 mm4.9213 in4.9213 in125 mm
- TTotal width
- 33.25 mm1.3091 in1.3091 in33.25 mm
Drawing
32214 specifications
| dBore diameter | 70 mm2.7559 in |
|---|---|
| DOutside diameter | 125 mm4.9213 in |
| TTotal width | 33.25 mm1.3091 in |
| BCone width | 31 mm1.2205 in |
| CCup width | 27 mm1.0630 in |
Also known as
32214J2/QHR32214J4T-3221432214-A32214-XL32214JR32214U
Other tapered roller bearings with a 70 mm bore
Same 70 mm bore in other bearing types
6014Ball Bearings6214Ball Bearings6314Ball Bearings7014Angular Contact Bearings7214Angular Contact Bearings7314Angular Contact BearingsNU214Cylindrical Roller BearingsNU314Cylindrical Roller BearingsNU2214Cylindrical Roller Bearings21314Spherical Roller Bearings22214Spherical Roller Bearings22314Spherical Roller Bearings1214Self-Aligning Ball Bearings1314Self-Aligning Ball Bearings2214Self-Aligning Ball Bearings51114Thrust Ball Bearings51214Thrust Ball Bearings51314Thrust Ball BearingsNA4914Needle Roller BearingsUC214Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.