32314 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 323 series (medium, wide)
The 32314 is a tapered roller bearing (323 series, medium, wide): 70 mm (2.7559 in) bore, 150 mm (5.9055 in) outside diameter and 54 mm (2.1260 in) total width. The cone is 51 mm (2.0079 in) wide and the cup 42 mm (1.6535 in).
- dBore diameter
- 70 mm2.7559 in2.7559 in70 mm
- DOutside diameter
- 150 mm5.9055 in5.9055 in150 mm
- TTotal width
- 54 mm2.1260 in2.1260 in54 mm
Drawing
32314 specifications
| dBore diameter | 70 mm2.7559 in |
|---|---|
| DOutside diameter | 150 mm5.9055 in |
| TTotal width | 54 mm2.1260 in |
| BCone width | 51 mm2.0079 in |
| CCup width | 42 mm1.6535 in |
Also known as
32314J2/QHR32314J4T-3231432314-A32314-XL32314JR32314U
Other tapered roller bearings with a 70 mm bore
Same 70 mm bore in other bearing types
6014Ball Bearings6214Ball Bearings6314Ball Bearings7014Angular Contact Bearings7214Angular Contact Bearings7314Angular Contact BearingsNU214Cylindrical Roller BearingsNU314Cylindrical Roller BearingsNU2214Cylindrical Roller Bearings21314Spherical Roller Bearings22214Spherical Roller Bearings22314Spherical Roller Bearings1214Self-Aligning Ball Bearings1314Self-Aligning Ball Bearings2214Self-Aligning Ball Bearings51114Thrust Ball Bearings51214Thrust Ball Bearings51314Thrust Ball BearingsNA4914Needle Roller BearingsUC214Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.