32218 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 322 series (light, wide)
The 32218 is a tapered roller bearing (322 series, light, wide): 90 mm (3.5433 in) bore, 160 mm (6.2992 in) outside diameter and 42.5 mm (1.6732 in) total width. The cone is 40 mm (1.5748 in) wide and the cup 34 mm (1.3386 in).
- dBore diameter
- 90 mm3.5433 in3.5433 in90 mm
- DOutside diameter
- 160 mm6.2992 in6.2992 in160 mm
- TTotal width
- 42.5 mm1.6732 in1.6732 in42.5 mm
Drawing
32218 specifications
| dBore diameter | 90 mm3.5433 in |
|---|---|
| DOutside diameter | 160 mm6.2992 in |
| TTotal width | 42.5 mm1.6732 in |
| BCone width | 40 mm1.5748 in |
| CCup width | 34 mm1.3386 in |
Also known as
32218J2/QHR32218J4T-3221832218-A32218-XL32218JR32218U
Other tapered roller bearings with a 90 mm bore
Same 90 mm bore in other bearing types
6018Ball Bearings6218Ball Bearings6318Ball Bearings7018Angular Contact Bearings7218Angular Contact Bearings7318Angular Contact BearingsNU218Cylindrical Roller BearingsNU318Cylindrical Roller BearingsNU2218Cylindrical Roller Bearings22218Spherical Roller Bearings21318Spherical Roller Bearings22318Spherical Roller Bearings1218Self-Aligning Ball Bearings1318Self-Aligning Ball Bearings2218Self-Aligning Ball Bearings51118Thrust Ball Bearings51218Thrust Ball Bearings51318Thrust Ball BearingsNA4918Needle Roller BearingsUC218Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.