32018 X Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 320 X series (extra light, wide)
The 32018 X is a tapered roller bearing (320 X series, extra light, wide): 90 mm (3.5433 in) bore, 140 mm (5.5118 in) outside diameter and 32 mm (1.2598 in) total width. The cone is 32 mm (1.2598 in) wide and the cup 24 mm (0.9449 in).
- dBore diameter
- 90 mm3.5433 in3.5433 in90 mm
- DOutside diameter
- 140 mm5.5118 in5.5118 in140 mm
- TTotal width
- 32 mm1.2598 in1.2598 in32 mm
Drawing
32018 X specifications
| dBore diameter | 90 mm3.5433 in |
|---|---|
| DOutside diameter | 140 mm5.5118 in |
| TTotal width | 32 mm1.2598 in |
| BCone width | 32 mm1.2598 in |
| CCup width | 24 mm0.9449 in |
Also known as
HR32018XJ4T-32018X32018-X-XL32018JR32018J2/QHR32018J4T-3201832018-A32018-XL32018U
Other tapered roller bearings with a 90 mm bore
Same 90 mm bore in other bearing types
6018Ball Bearings6218Ball Bearings6318Ball Bearings7018Angular Contact Bearings7218Angular Contact Bearings7318Angular Contact BearingsNU218Cylindrical Roller BearingsNU318Cylindrical Roller BearingsNU2218Cylindrical Roller Bearings22218Spherical Roller Bearings21318Spherical Roller Bearings22318Spherical Roller Bearings1218Self-Aligning Ball Bearings1318Self-Aligning Ball Bearings2218Self-Aligning Ball Bearings51118Thrust Ball Bearings51218Thrust Ball Bearings51318Thrust Ball BearingsNA4918Needle Roller BearingsUC218Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.