T20 Timing Belt Profile Dimensions

Timing Belts · Trapezoidal, metric T (DIN 7721)

T20 timing belts (Trapezoidal, metric T, DIN 7721) have a 20 mm (0.787 in) pitch, a tooth height of 5 mm (0.197 in) and an overall belt height of about 8 mm (0.315 in). Common widths: 32, 50, 75, 100 mm. A pulley with z teeth has a pitch diameter of z × 20 mm / π.

pPitch
20 mm0.787 in0.787 in20 mm
hₜTooth height
5 mm0.197 in0.197 in5 mm
hₛBelt height (typical)
8 mm0.315 in0.315 in8 mm

Drawing

p = 20 mmp = 0.787 in8 mm0.315 in5 mm0.197 in2β = 40°
Two pitches, teeth down. Tooth drawn from root width and flank angle.Drawn to scale · Dimensions in mmDimensions in inches

T20 specifications

pPitch20 mm0.787 in
hₜTooth height5 mm0.197 in
hₛBelt height (typical)8 mm0.315 in
sTooth width at root10.15 mm0.400 in
2βTooth flank angle40°
Tooth profileTrapezoidal
Common widths32, 50, 75, 100 mm

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.