13.4 m reefer (frigo) Dimensions
Trailers & Trucks · European trailers and trucks
A 13.4 m reefer (frigo) measures about 13.41 m (44 ft) × 2490 mm (98 in) × 2700 mm (106.3 in) inside (length × width × height). It holds 33 EUR pallets on the floor and a typical payload of 21,000 kg (46,297 lb).
- LInside length (load length)
- 13.41 m44 ft44 ft13.41 m
- WInside width
- 2490 mm98 in98 in2490 mm
- HInside height
- 2700 mm106.3 in106.3 in2700 mm
- GMA 48 × 40 pallets (1 tier)
- 26
Drawing
13.4 m reefer (frigo) specifications
| LInside length (load length) | 13.41 m44 ft |
|---|---|
| WInside width | 2490 mm98 in |
| HInside height | 2700 mm106.3 in |
| Load volume (approx.) | 90 m³3178 ft³ |
| Payload (typical) | 21,000 kg46,297 lb |
| GMA 48 × 40 pallets (1 tier) | 26 |
| EUR 1200 × 800 pallets (1 tier) | 33 |
| Outside / notes | 13.6 × 2.60 × 4.0 m (vehicle) |
Also known as
Kühlauflieger
Other equipment in this group
All Trailers & Trucks sizes
Sources
- FHWA: Federal size regulations for commercial motor vehicles (23 CFR 658: 102 in width, 80,000 lb, 48/53 ft trailers)
- Council Directive 96/53/EC (as amended by Directive (EU) 2015/719): maximum dimensions and weights in the EU
- Utility Trailer: 4000D-X dry van specifications (inside width and height)
- Wabash: DuraPlate dry van and reefer specifications
- Schmitz Cargobull: S.CS curtainsider and S.KO reefer semi-trailer data
- Hale Trailer: Interior and exterior dimensions of a 53 foot trailer (dry van and reefer)
- Penske Truck Rental: 16 foot box truck specifications
- U-Haul: 26 ft truck interior dimensions and max load
- Wikipedia (de): Megatrailer (13.60 × 2.48 × 3.00 m inside)
- Condor Ferries: Trailer types (EU trailer inside dimensions, volume, weight, pallets)
- Hale Trailer: Step deck vs. flatbed trailer
- Hale Trailer: Dry van maximum cargo weight
- Repackify: Freight equipment dimensions (48 / 53 ft vans)
- Mercer Transportation: How many pallets fit in a truck (carrier equipment guide)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.