Road train 2 × 8.0 m (jumbo) Dimensions
Trailers & Trucks · European trailers and trucks
A Road train 2 × 8.0 m (jumbo) measures about 16 m (52.5 ft) × 2480 mm (97.6 in) × 2950 mm (116.1 in) inside (length × width × height). It holds 38 EUR pallets on the floor and a typical payload of 21,000 kg (46,297 lb).
- LInside length (load length)
- 16 m52.5 ft52.5 ft16 m
- WInside width
- 2480 mm97.6 in97.6 in2480 mm
- HInside height
- 2950 mm116.1 in116.1 in2950 mm
- GMA 48 × 40 pallets (1 tier)
- 28
Drawing
Road train 2 × 8.0 m (jumbo) specifications
| LInside length (load length) | 16 m52.5 ft |
|---|---|
| WInside width | 2480 mm97.6 in |
| HInside height | 2950 mm116.1 in |
| Load volume (approx.) | 120 m³4238 ft³ |
| Payload (typical) | 21,000 kg46,297 lb |
| GMA 48 × 40 pallets (1 tier) | 28 |
| EUR 1200 × 800 pallets (1 tier) | 38 |
| Outside / notes | truck 8.0 m box + trailer 8.0 m box, 18.75 m total |
Also known as
Gliederzug
Other equipment in this group
All Trailers & Trucks sizes
Sources
- FHWA: Federal size regulations for commercial motor vehicles (23 CFR 658: 102 in width, 80,000 lb, 48/53 ft trailers)
- Council Directive 96/53/EC (as amended by Directive (EU) 2015/719): maximum dimensions and weights in the EU
- Utility Trailer: 4000D-X dry van specifications (inside width and height)
- Wabash: DuraPlate dry van and reefer specifications
- Schmitz Cargobull: S.CS curtainsider and S.KO reefer semi-trailer data
- Hale Trailer: Interior and exterior dimensions of a 53 foot trailer (dry van and reefer)
- Penske Truck Rental: 16 foot box truck specifications
- U-Haul: 26 ft truck interior dimensions and max load
- Wikipedia (de): Megatrailer (13.60 × 2.48 × 3.00 m inside)
- Condor Ferries: Trailer types (EU trailer inside dimensions, volume, weight, pallets)
- Hale Trailer: Step deck vs. flatbed trailer
- Hale Trailer: Dry van maximum cargo weight
- Repackify: Freight equipment dimensions (48 / 53 ft vans)
- Mercer Transportation: How many pallets fit in a truck (carrier equipment guide)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.