SPB V-Belt Section Dimensions

V-Belts · Narrow wedge belts (ISO 4184 / DIN 7753, SP)

The SPB V-belt section is 16.3 mm (0.642 in) wide at the top and 13 mm (0.512 in) high, with a 40° included angle. The section must match the pulley groove; the belt length is ordered separately.

bTop width
16.3 mm0.642 in0.642 in16.3 mm
hHeight
13 mm0.512 in0.512 in13 mm
bdDatum (pitch) width
14 mm0.551 in0.551 in14 mm

Drawing

b 16.3 mmb 0.642 inh 13 mmh 0.512 inbd 14 mmbd 0.551 indatum line40°
Drawn to scale · Dimensions in mmDimensions in inches

SPB specifications

bTop width16.3 mm0.642 in
hHeight13 mm0.512 in
bdDatum (pitch) width14 mm0.551 in
Height / width0.80
Belt angle40°
Pulley groove angle34° / 38°

SPB (16.3 × 13 mm) shares the 14 mm datum width of the classical B section and fits B-section pulleys; the inch 5V section is close but not identical.

Also known as

XPB

Similar section in the other system (check the pulley groove)

All V-belt sections

Compare all 16 sections in the V-Belts chart →

Sources

  1. ISO 4184:1992, Belt drives: Classical and narrow V-belts, Lengths in datum system
  2. DIN 7753-1: Endless narrow V-belts for machine construction (SPZ, SPA, SPB, SPC)
  3. DIN 2215: Endless classical V-belts
  4. RMA/MPTA IP-22: Narrow multiple V-belts (3V, 5V, 8V); IP-23: Light duty (FHP) V-belts
  5. Gates: Heavy duty V-belt drive design manual

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.