SPZ V-Belt Section Dimensions

V-Belts · Narrow wedge belts (ISO 4184 / DIN 7753, SP)

The SPZ V-belt section is 9.7 mm (0.382 in) wide at the top and 8 mm (0.315 in) high, with a 40° included angle. The section must match the pulley groove; the belt length is ordered separately.

bTop width
9.7 mm0.382 in0.382 in9.7 mm
hHeight
8 mm0.315 in0.315 in8 mm
bdDatum (pitch) width
8.5 mm0.335 in0.335 in8.5 mm

Drawing

b 9.7 mmb 0.382 inh 8 mmh 0.315 inbd 8.5 mmbd 0.335 indatum line40°
Drawn to scale · Dimensions in mmDimensions in inches

SPZ specifications

bTop width9.7 mm0.382 in
hHeight8 mm0.315 in
bdDatum (pitch) width8.5 mm0.335 in
Height / width0.82
Belt angle40°
Pulley groove angle34° / 38°

SPZ (9.7 × 8 mm) has the same 8.5 mm datum width as the classical Z section and runs in Z grooves, transmitting considerably more power. Its closest inch counterpart is 3V.

Also known as

XPZ

Similar section in the other system (check the pulley groove)

All V-belt sections

Compare all 16 sections in the V-Belts chart →

Sources

  1. ISO 4184:1992, Belt drives: Classical and narrow V-belts, Lengths in datum system
  2. DIN 7753-1: Endless narrow V-belts for machine construction (SPZ, SPA, SPB, SPC)
  3. DIN 2215: Endless classical V-belts
  4. RMA/MPTA IP-22: Narrow multiple V-belts (3V, 5V, 8V); IP-23: Light duty (FHP) V-belts
  5. Gates: Heavy duty V-belt drive design manual

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.