W36×925 Beam Dimensions & Properties
W Shapes (AISC) · W36: 36 in nominal depth
W36×925 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 43.1 in (1094.7 mm) deep with a 18.6 in (472.4 mm) flange, a 3.02 in (76.7 mm) web and a 4.53 in (115.1 mm) flange, and weighs 925 lb/ft (1376.6 kg/m). Area 272 in² (175,484 mm²); strong-axis Ix = 73,000 in⁴ (3,038,489.4 cm⁴), Sx = 3,390 in³ (55,552.1 cm³), Zx = 4,130 in³ (67,678.6 cm³).
- dDepth
- 1094.7 mm43.1 in43.1 in1094.7 mm
- bfFlange width
- 472.4 mm18.6 in18.6 in472.4 mm
- twWeb thickness
- 76.7 mm3.02 in3.02 in76.7 mm
- tfFlange thickness
- 115.1 mm4.53 in4.53 in115.1 mm
Drawing
W36×925 specifications
| dDepth | 43.1 in1094.7 mm |
|---|---|
| bfFlange width | 18.6 in472.4 mm |
| twWeb thickness | 3.02 in76.7 mm |
| tfFlange thickness | 4.53 in115.1 mm |
| kDesign value | 5.28 in134.1 mm |
| kDetailing value | 5 3/8 in136.5 mm |
| k1Detailing value | 2 5/16 in58.7 mm |
| WWeight | 925 lb/ft1376.6 kg/m |
| AArea | 272 in²175,484 mm² |
| IxMoment of inertia, strong axis | 73,000 in⁴3,038,489.4 cm⁴ |
| ZxPlastic modulus, strong axis | 4,130 in³67,678.6 cm³ |
| SxSection modulus, strong axis | 3,390 in³55,552.1 cm³ |
| rxRadius of gyration, strong axis | 16.4 in416.6 mm |
| IyMoment of inertia, weak axis | 4,940 in⁴205,618.3 cm⁴ |
| ZyPlastic modulus, weak axis | 862 in³14,125.6 cm³ |
| SySection modulus, weak axis | 531 in³8,701.5 cm³ |
| ryRadius of gyration, weak axis | 4.26 in108.2 mm |
| JTorsional constant | 1,430 in⁴59,521.09 cm⁴ |
| bf/2tfFlange slenderness | 2.05 |
| h/twWeb slenderness | 10.8 |
| Metric designation | W920×1377 |
Also known as
W920×1377
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.