M64 Washer Size: Inside and Outside Diameter

Flat Washers

An M64 flat washer (ISO 7089 / DIN 125) has a 70 mm (2.756 in) hole, a 115 mm (4.528 in) outside diameter and is 10 mm (0.394 in) thick. Large-series (fender) dimensions to ISO 7093, where the standard lists them, are in the table below.

d₁Inside diameter
70 mm2.756 in2.756 in70 mm
d₂Outside diameter
115 mm4.528 in4.528 in115 mm
hThickness
10 mm0.394 in0.394 in10 mm

Drawing

⌀70 mm⌀2.756 in⌀115 mm⌀4.528 in
h 10 mmh 0.394 in⌀115 mm⌀4.528 in⌀70 mm⌀2.756 in
Drawn to scale · Dimensions in mmDimensions in inches

M64 specifications

d₁Inside diameter70 mm2.756 in
d₂Outside diameter115 mm4.528 in
hThickness10 mm0.394 in

ISO 7089 M64: 70 mm bore, 115 mm outside, 10 mm thick. DIN 125 tables list a 66 mm bore for the same size.

M64 in other charts

All Flat Washers sizes

Compare all 24 sizes in the Flat Washers chart →

Sources

  1. ISO 7089:2000, Plain washers, normal series, product grade A
  2. ISO 7093-1:2000, Plain washers, large series, part 1: product grade A
  3. ISO 7093-2:2000, Plain washers, large series, part 2: product grade C (outside diameters and thickness)
  4. fasten.it and Boltport: ISO 7089 dimension tables (M42–M64 cross-check)
  5. ISO 887:2000, Plain washers for metric bolts, screws and nuts, general plan

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.