3/8″ Wire Rope Breaking Strength

Wire Rope · 6×19 / 6×36 class IWRC, bright: EIPS (and IPS), ASTM A1023 / RR-W-410

3/8″ wire rope (6×19 or 6×36 class, IWRC, bright) has a minimum breaking force of 15,100 lbf (67.2 kN) in EIPS grade and 13,120 lbf (58.4 kN) in IPS grade. At the 5:1 sling design factor the working load limit is 3,020 lbf (13.4 kN).

Minimum breaking force (EIPS / 1960 / MIL)
67.2 kN15,100 lbf15,100 lbf67.2 kN
WLL at 5:1 (EIPS / 1960)
13.4 kN3,020 lbf3,020 lbf13.4 kN

Drawing

d 9.5 mmd 0.375 in
Six-strand rope with an independent wire rope core (IWRC), schematic. Measure d across the strand crowns, not across the flats.Proportions shown, not to scale · Dimensions in mmDimensions in inches

3/8″ specifications

dRope diameter9.5 mm0.375 in
Construction6×19 or 6×36 class, IWRC (independent wire rope core)
Minimum breaking force (EIPS / 1960 / MIL)67.2 kN15,100 lbf
Min. breaking force, lower grade (IPS / 1770)58.4 kN13,120 lbf
WLL at 5:1 (EIPS / 1960)13.4 kN3,020 lbf
Approx. weight (6×19 IWRC)0.39 kg/m0.26 lb/ft

3/8 in rope is the common size for 8,000–12,000 lb vehicle winches when replaced with steel; the winch maker's specified rope grade matters more than the diameter.

Shackle of the same size

All Wire Rope sizes

Compare all 42 sizes in the Wire Rope chart →

Sources

  1. ASTM A1023/A1023M: Stranded Carbon Steel Wire Ropes for General Purposes
  2. US Federal Specification RR-W-410: Wire Rope and Strand
  3. Union (WireCo): 6×19 & 6×36 IWRC rope tables (IPS / XIP / XXIP)
  4. EN 12385-4: Steel wire ropes, stranded ropes for general lifting applications (breaking force factor K)
  5. Carl Stahl / Usha Martin: 6×36WS-IWRC 1960 minimum breaking force tables
  6. Engineering ToolBox: Wire ropes, strengths (6×19 IPS fibre core)
  7. MIL-DTL-83420: Wire rope, flexible, for aircraft control (7×7, 7×19); Lexco Cable catalogue
  8. ASME B30.9: Slings (5:1 design factor for wire rope slings)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.