3312 Angular Contact Bearing Dimensions
Angular Contact Bearings · 33 series, double row, medium (US 53xx)
The 3312 is an angular contact ball bearing (33 series, double row, medium, US 53xx). It has a 60 mm (2.362 in) bore, a 130 mm (5.118 in) outside diameter and is 54 mm (2.126 in) wide. Contact angle: 25°–35° (by maker). The boundary dimensions are the same for every brand and every suffix.
- dBore diameter
- 60 mm2.362 in2.362 in60 mm
- DOutside diameter
- 130 mm5.118 in5.118 in130 mm
- BWidth
- 54 mm2.126 in2.126 in54 mm
Drawing
3312 specifications
| dBore diameter | 60 mm2.362 in |
|---|---|
| DOutside diameter | 130 mm5.118 in |
| BWidth | 54 mm2.126 in |
| αContact angle | 25°–35° (by maker) |
Also known as
3312A3312-2RS3312-2Z3312A-2RS13312A-2Z3312ATN93312-BD3312-B-2RSR3312-B-2Z3312J3312B3312S53125312-2RS5312-ZZ
Other angular contact bearings with a 60 mm bore
Same 60 mm bore in other bearing types
6012Ball Bearings6212Ball Bearings6312Ball Bearings30212Tapered Roller Bearings30312Tapered Roller Bearings31312Tapered Roller BearingsNU212Cylindrical Roller BearingsNU312Cylindrical Roller BearingsNU2212Cylindrical Roller Bearings22212Spherical Roller Bearings22312Spherical Roller Bearings21312Spherical Roller Bearings1212Self-Aligning Ball Bearings1312Self-Aligning Ball Bearings2212Self-Aligning Ball Bearings51112Thrust Ball Bearings51212Thrust Ball Bearings51312Thrust Ball BearingsNA4912Needle Roller BearingsUC212Bearing Units (UCP, UCF, UCFL)
All Angular Contact Bearings sizes
Compare all 103 sizes in the Angular Contact Bearings chart →
Sources
- ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
- DIN 628-1 / DIN 628-3: Angular contact ball bearings, single row and double row
- SKF: Angular contact ball bearings, product tables (72 BE, 73 BE, 32 A, 33 A)
- Schaeffler (FAG) medias: 72-B, 73-B, 32-B, 33-B angular contact ball bearings
- NSK: Rolling bearings catalogue (CAT. E1102), angular contact ball bearings
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.