30212 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 302 series (light)
The 30212 is a tapered roller bearing (302 series, light): 60 mm (2.3622 in) bore, 110 mm (4.3307 in) outside diameter and 23.75 mm (0.9350 in) total width. The cone is 22 mm (0.8661 in) wide and the cup 19 mm (0.7480 in).
- dBore diameter
- 60 mm2.3622 in2.3622 in60 mm
- DOutside diameter
- 110 mm4.3307 in4.3307 in110 mm
- TTotal width
- 23.75 mm0.9350 in0.9350 in23.75 mm
Drawing
30212 specifications
| dBore diameter | 60 mm2.3622 in |
|---|---|
| DOutside diameter | 110 mm4.3307 in |
| TTotal width | 23.75 mm0.9350 in |
| BCone width | 22 mm0.8661 in |
| CCup width | 19 mm0.7480 in |
Also known as
30212J2/QHR30212J4T-3021230212-A30212-XL30212JR30212U
Other tapered roller bearings with a 60 mm bore
Same 60 mm bore in other bearing types
6012Ball Bearings6212Ball Bearings6312Ball Bearings7012Angular Contact Bearings7212Angular Contact Bearings7312Angular Contact BearingsNU212Cylindrical Roller BearingsNU312Cylindrical Roller BearingsNU2212Cylindrical Roller Bearings22212Spherical Roller Bearings22312Spherical Roller Bearings21312Spherical Roller Bearings1212Self-Aligning Ball Bearings1312Self-Aligning Ball Bearings2212Self-Aligning Ball Bearings51112Thrust Ball Bearings51212Thrust Ball Bearings51312Thrust Ball BearingsNA4912Needle Roller BearingsUC212Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.