7208 Angular Contact Bearing Dimensions
Angular Contact Bearings · 72 series, light (B 40°)
The 7208 is an angular contact ball bearing (72 series, light, B 40°). It has a 40 mm (1.575 in) bore, a 80 mm (3.150 in) outside diameter and is 18 mm (0.709 in) wide. Contact angle: 40° (B). The boundary dimensions are the same for every brand and every suffix.
- dBore diameter
- 40 mm1.575 in1.575 in40 mm
- DOutside diameter
- 80 mm3.150 in3.150 in80 mm
- BWidth
- 18 mm0.709 in0.709 in18 mm
Drawing
7208 specifications
| dBore diameter | 40 mm1.575 in |
|---|---|
| DOutside diameter | 80 mm3.150 in |
| BWidth | 18 mm0.709 in |
| αContact angle | 40° (B) |
Also known as
7208B7208BE7208BEP7208BECBP7208BEGAP7208B-2RZ7208AC7208C7208-B-XL-TVP7208-B-XL-MP7208BDB7208BDF7208BDT7208BW7208A
Other angular contact bearings with a 40 mm bore
Same 40 mm bore in other bearing types
6008Ball Bearings6208Ball Bearings6308Ball Bearings30208Tapered Roller Bearings32008 XTapered Roller Bearings30308Tapered Roller BearingsNU208Cylindrical Roller BearingsNU308Cylindrical Roller BearingsNU2208Cylindrical Roller Bearings22208Spherical Roller Bearings21308Spherical Roller Bearings22308Spherical Roller Bearings1208Self-Aligning Ball Bearings2208Self-Aligning Ball Bearings1308Self-Aligning Ball Bearings51108Thrust Ball Bearings51208Thrust Ball Bearings51308Thrust Ball BearingsNA4908Needle Roller BearingsUC208Bearing Units (UCP, UCF, UCFL)
All Angular Contact Bearings sizes
Compare all 103 sizes in the Angular Contact Bearings chart →
Sources
- ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
- DIN 628-1 / DIN 628-3: Angular contact ball bearings, single row and double row
- SKF: Angular contact ball bearings, product tables (72 BE, 73 BE, 32 A, 33 A)
- Schaeffler (FAG) medias: 72-B, 73-B, 32-B, 33-B angular contact ball bearings
- NSK: Rolling bearings catalogue (CAT. E1102), angular contact ball bearings
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.