32008 X Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 320 X series (extra light, wide)
The 32008 X is a tapered roller bearing (320 X series, extra light, wide): 40 mm (1.5748 in) bore, 68 mm (2.6772 in) outside diameter and 19 mm (0.7480 in) total width. The cone is 19 mm (0.7480 in) wide and the cup 14.5 mm (0.5709 in).
- dBore diameter
- 40 mm1.5748 in1.5748 in40 mm
- DOutside diameter
- 68 mm2.6772 in2.6772 in68 mm
- TTotal width
- 19 mm0.7480 in0.7480 in19 mm
Drawing
32008 X specifications
| dBore diameter | 40 mm1.5748 in |
|---|---|
| DOutside diameter | 68 mm2.6772 in |
| TTotal width | 19 mm0.7480 in |
| BCone width | 19 mm0.7480 in |
| CCup width | 14.5 mm0.5709 in |
Also known as
HR32008XJ4T-32008X32008-X-XL32008JR32008J2/QHR32008J4T-3200832008-A32008-XL32008U
Other tapered roller bearings with a 40 mm bore
Same 40 mm bore in other bearing types
6008Ball Bearings6208Ball Bearings6308Ball Bearings7208Angular Contact Bearings7308Angular Contact Bearings7008Angular Contact BearingsNU208Cylindrical Roller BearingsNU308Cylindrical Roller BearingsNU2208Cylindrical Roller Bearings22208Spherical Roller Bearings21308Spherical Roller Bearings22308Spherical Roller Bearings1208Self-Aligning Ball Bearings2208Self-Aligning Ball Bearings1308Self-Aligning Ball Bearings51108Thrust Ball Bearings51208Thrust Ball Bearings51308Thrust Ball BearingsNA4908Needle Roller BearingsUC208Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.