7213 Angular Contact Bearing Dimensions
Angular Contact Bearings · 72 series, light (B 40°)
The 7213 is an angular contact ball bearing (72 series, light, B 40°). It has a 65 mm (2.559 in) bore, a 120 mm (4.724 in) outside diameter and is 23 mm (0.906 in) wide. Contact angle: 40° (B). The boundary dimensions are the same for every brand and every suffix.
- dBore diameter
- 65 mm2.559 in2.559 in65 mm
- DOutside diameter
- 120 mm4.724 in4.724 in120 mm
- BWidth
- 23 mm0.906 in0.906 in23 mm
Drawing
7213 specifications
| dBore diameter | 65 mm2.559 in |
|---|---|
| DOutside diameter | 120 mm4.724 in |
| BWidth | 23 mm0.906 in |
| αContact angle | 40° (B) |
Also known as
7213B7213BE7213BEP7213BECBP7213BEGAP7213B-2RZ7213AC7213C7213-B-XL-TVP7213-B-XL-MP7213BDB7213BDF7213BDT7213BW7213A
Other angular contact bearings with a 65 mm bore
Same 65 mm bore in other bearing types
6013Ball Bearings6213Ball Bearings6313Ball Bearings30213Tapered Roller Bearings30313Tapered Roller Bearings31313Tapered Roller BearingsNU213Cylindrical Roller BearingsNU313Cylindrical Roller BearingsNU2213Cylindrical Roller Bearings21313Spherical Roller Bearings22213Spherical Roller Bearings22313Spherical Roller Bearings1213Self-Aligning Ball Bearings1313Self-Aligning Ball Bearings2213Self-Aligning Ball Bearings51113Thrust Ball Bearings51213Thrust Ball Bearings51313Thrust Ball BearingsNA4913Needle Roller BearingsUC213Bearing Units (UCP, UCF, UCFL)
All Angular Contact Bearings sizes
Compare all 103 sizes in the Angular Contact Bearings chart →
Sources
- ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
- DIN 628-1 / DIN 628-3: Angular contact ball bearings, single row and double row
- SKF: Angular contact ball bearings, product tables (72 BE, 73 BE, 32 A, 33 A)
- Schaeffler (FAG) medias: 72-B, 73-B, 32-B, 33-B angular contact ball bearings
- NSK: Rolling bearings catalogue (CAT. E1102), angular contact ball bearings
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.