30213 Tapered Roller Bearing Dimensions
Tapered Roller Bearings · 302 series (light)
The 30213 is a tapered roller bearing (302 series, light): 65 mm (2.5591 in) bore, 120 mm (4.7244 in) outside diameter and 24.75 mm (0.9744 in) total width. The cone is 23 mm (0.9055 in) wide and the cup 20 mm (0.7874 in).
- dBore diameter
- 65 mm2.5591 in2.5591 in65 mm
- DOutside diameter
- 120 mm4.7244 in4.7244 in120 mm
- TTotal width
- 24.75 mm0.9744 in0.9744 in24.75 mm
Drawing
30213 specifications
| dBore diameter | 65 mm2.5591 in |
|---|---|
| DOutside diameter | 120 mm4.7244 in |
| TTotal width | 24.75 mm0.9744 in |
| BCone width | 23 mm0.9055 in |
| CCup width | 20 mm0.7874 in |
Also known as
30213J2/QHR30213J4T-3021330213-A30213-XL30213JR30213U
Other tapered roller bearings with a 65 mm bore
Same 65 mm bore in other bearing types
6013Ball Bearings6213Ball Bearings6313Ball Bearings7013Angular Contact Bearings7213Angular Contact Bearings7313Angular Contact BearingsNU213Cylindrical Roller BearingsNU313Cylindrical Roller BearingsNU2213Cylindrical Roller Bearings21313Spherical Roller Bearings22213Spherical Roller Bearings22313Spherical Roller Bearings1213Self-Aligning Ball Bearings1313Self-Aligning Ball Bearings2213Self-Aligning Ball Bearings51113Thrust Ball Bearings51213Thrust Ball Bearings51313Thrust Ball BearingsNA4913Needle Roller BearingsUC213Bearing Units (UCP, UCF, UCFL)
All Tapered Roller Bearings sizes
Compare all 120 sizes in the Tapered Roller Bearings chart →
Sources
- ISO 355:2019, Rolling bearings, tapered roller bearings, boundary dimensions and series designations
- DIN 720: Tapered roller bearings (metric series)
- Timken: Tapered roller bearings, TS single-row imperial (cad.timken.com part pages)
- Schaeffler (FAG) medias: 302, 303, 320-X, 322, 323, 313 tapered roller bearings
- NSK / Koyo / NTN: Tapered roller bearing product data (HR…J, …JR, 4T-…)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.