7315 Angular Contact Bearing Dimensions
Angular Contact Bearings · 73 series, medium (B 40°)
The 7315 is an angular contact ball bearing (73 series, medium, B 40°). It has a 75 mm (2.953 in) bore, a 160 mm (6.299 in) outside diameter and is 37 mm (1.457 in) wide. Contact angle: 40° (B). The boundary dimensions are the same for every brand and every suffix.
- dBore diameter
- 75 mm2.953 in2.953 in75 mm
- DOutside diameter
- 160 mm6.299 in6.299 in160 mm
- BWidth
- 37 mm1.457 in1.457 in37 mm
Drawing
7315 specifications
| dBore diameter | 75 mm2.953 in |
|---|---|
| DOutside diameter | 160 mm6.299 in |
| BWidth | 37 mm1.457 in |
| αContact angle | 40° (B) |
Also known as
7315B7315BE7315BEP7315BECBP7315BEGAP7315B-2RZ7315AC7315C7315-B-XL-TVP7315-B-XL-MP7315BDB7315BDF7315BDT7315BW7315A
Other angular contact bearings with a 75 mm bore
Same 75 mm bore in other bearing types
6015Ball Bearings6215Ball Bearings6315Ball Bearings30215Tapered Roller Bearings30315Tapered Roller Bearings31315Tapered Roller BearingsNU215Cylindrical Roller BearingsNU315Cylindrical Roller BearingsNU2215Cylindrical Roller Bearings22215Spherical Roller Bearings21315Spherical Roller Bearings22315Spherical Roller Bearings1215Self-Aligning Ball Bearings1315Self-Aligning Ball Bearings2215Self-Aligning Ball Bearings51115Thrust Ball Bearings51215Thrust Ball Bearings51315Thrust Ball BearingsNA4915Needle Roller BearingsUC215Bearing Units (UCP, UCF, UCFL)
All Angular Contact Bearings sizes
Compare all 103 sizes in the Angular Contact Bearings chart →
Sources
- ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
- DIN 628-1 / DIN 628-3: Angular contact ball bearings, single row and double row
- SKF: Angular contact ball bearings, product tables (72 BE, 73 BE, 32 A, 33 A)
- Schaeffler (FAG) medias: 72-B, 73-B, 32-B, 33-B angular contact ball bearings
- NSK: Rolling bearings catalogue (CAT. E1102), angular contact ball bearings
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.