7316 Angular Contact Bearing Dimensions
Angular Contact Bearings · 73 series, medium (B 40°)
The 7316 is an angular contact ball bearing (73 series, medium, B 40°). It has a 80 mm (3.150 in) bore, a 170 mm (6.693 in) outside diameter and is 39 mm (1.535 in) wide. Contact angle: 40° (B). The boundary dimensions are the same for every brand and every suffix.
- dBore diameter
- 80 mm3.150 in3.150 in80 mm
- DOutside diameter
- 170 mm6.693 in6.693 in170 mm
- BWidth
- 39 mm1.535 in1.535 in39 mm
Drawing
7316 specifications
| dBore diameter | 80 mm3.150 in |
|---|---|
| DOutside diameter | 170 mm6.693 in |
| BWidth | 39 mm1.535 in |
| αContact angle | 40° (B) |
Also known as
7316B7316BE7316BEP7316BECBP7316BEGAP7316B-2RZ7316AC7316C7316-B-XL-TVP7316-B-XL-MP7316BDB7316BDF7316BDT7316BW7316A
Other angular contact bearings with a 80 mm bore
Same 80 mm bore in other bearing types
6016Ball Bearings6216Ball Bearings6316Ball Bearings30216Tapered Roller Bearings30316Tapered Roller Bearings31316Tapered Roller BearingsNU216Cylindrical Roller BearingsNU316Cylindrical Roller BearingsNU2216Cylindrical Roller Bearings22316Spherical Roller Bearings21316Spherical Roller Bearings22216Spherical Roller Bearings1216Self-Aligning Ball Bearings1316Self-Aligning Ball Bearings2216Self-Aligning Ball Bearings51116Thrust Ball Bearings51216Thrust Ball Bearings51316Thrust Ball BearingsNA4916Needle Roller BearingsUC216Bearing Units (UCP, UCF, UCFL)
All Angular Contact Bearings sizes
Compare all 103 sizes in the Angular Contact Bearings chart →
Sources
- ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
- DIN 628-1 / DIN 628-3: Angular contact ball bearings, single row and double row
- SKF: Angular contact ball bearings, product tables (72 BE, 73 BE, 32 A, 33 A)
- Schaeffler (FAG) medias: 72-B, 73-B, 32-B, 33-B angular contact ball bearings
- NSK: Rolling bearings catalogue (CAT. E1102), angular contact ball bearings
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.