RCA (phono): Pinout and Size

Audio Jacks & Connectors · RCA and Speakon

The RCA (phono) connector has 2 contacts. Signal: Unbalanced mono (one per channel). Typical use: Hi-fi line level, turntables, composite video, S/PDIF coaxial. Reference: IEC 60603-14 (phono connector).

Contacts
2

Drawing

signal (centre pin)ground (shell)
Contact layout, schematic.Proportions shown, not to scale

RCA (phono) specifications

Contacts2
SignalUnbalanced mono (one per channel)
Typical useHi-fi line level, turntables, composite video, S/PDIF coaxial
StandardIEC 60603-14 (phono connector)

RCA (phono) pinout

ContactSignalFunction
PinSignalCentre pin: signal
ShellGroundOuter ring: ground / shield

Same plug for analogue audio, composite video and coaxial S/PDIF; only the impedance and colour differ (75 Ω cable for video and digital audio).

Also known as

RCA

All audio connectors

All 13 connectors in the Audio Jacks & Connectors chart →

Sources

  1. EIA RS-453 / IEC 60603-11: concentric phone plugs (0.206 in type); MIL-DTL-642 telephone plugs
  2. JEITA RC-8141C: 4.4 mm 5-pole (Pentaconn) headphone plug; Nippon DICS Pentaconn product data
  3. IEC 60268-12 / AES14: Application of connectors for broadcast and audio (XLR pin 1 shield, 2 hot, 3 cold)
  4. Neutrik: XLR and speakON (NL2, NL4) connector data sheets and wiring
  5. Switchcraft: 1/4 in and 3.5 mm phone plug drawings
  6. Wikipedia: Phone connector (audio): CTIA vs OMTP TRRS, balanced conventions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.