Speakon NL4: Pinout and Size

Audio Jacks & Connectors · RCA and Speakon

The Speakon NL4 connector has 4 contacts. Signal: Speaker level, 1 or 2 channels. Typical use: Professional loudspeakers and amplifiers (locking, high current). Reference: Neutrik Speakon.

Contacts
4

Drawing

1−1+2+2−Plug, viewed from the contact side
Contact layout, schematic.Proportions shown, not to scale

Speakon NL4 specifications

Contacts4
SignalSpeaker level, 1 or 2 channels
Typical useProfessional loudspeakers and amplifiers (locking, high current)
StandardNeutrik Speakon

Speakon NL4 pinout

ContactSignalFunction
1+Channel 1 +Speaker 1 positive (single speaker: use 1+ / 1−)
1−Channel 1 −Speaker 1 negative
2+Channel 2 +Second speaker or bi-amp high band, positive
2−Channel 2 −Second speaker or bi-amp high band, negative

NL2 plugs fit NL4 sockets (contacts 1+ / 1−). A single speaker is wired to 1+ and 1−; 2+ and 2− carry a second speaker or the high band in bi-amped systems.

Also known as

SpeakonNL4NL2

All audio connectors

All 13 connectors in the Audio Jacks & Connectors chart →

Sources

  1. EIA RS-453 / IEC 60603-11: concentric phone plugs (0.206 in type); MIL-DTL-642 telephone plugs
  2. JEITA RC-8141C: 4.4 mm 5-pole (Pentaconn) headphone plug; Nippon DICS Pentaconn product data
  3. IEC 60268-12 / AES14: Application of connectors for broadcast and audio (XLR pin 1 shield, 2 hot, 3 cold)
  4. Neutrik: XLR and speakON (NL2, NL4) connector data sheets and wiring
  5. Switchcraft: 1/4 in and 3.5 mm phone plug drawings
  6. Wikipedia: Phone connector (audio): CTIA vs OMTP TRRS, balanced conventions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.