6.35 mm (1/4 in) TS: Pinout and Size

Audio Jacks & Connectors · Phone plugs (jacks)

The 6.35 mm (1/4 in) TS plug is 6.35 mm (0.250 in) in diameter with 2 contacts. Signal: Unbalanced mono. Typical use: Guitar and instrument cables, unbalanced line, older passive speakers. Reference: 1/4 in phone plug (A-gauge pattern); dimensions per maker drawings.

dPlug diameter
6.35 mm0.250 in0.250 in6.35 mm
Contacts
2

Drawing

TipSignalSleeveGround6.35 mm0.250 in
Contact order of the plug, schematic; only the diameter is a real dimension.Proportions shown, not to scale · Dimensions in mmDimensions in inches

6.35 mm (1/4 in) TS specifications

dPlug diameter6.35 mm0.250 in
Contacts2
SignalUnbalanced mono
Typical useGuitar and instrument cables, unbalanced line, older passive speakers
Standard1/4 in phone plug (A-gauge pattern); dimensions per maker drawings

6.35 mm (1/4 in) TS pinout

ContactSignalFunction
TipSignalMono signal (instrument, line, speaker)
SleeveGroundGround / shield

Instrument (guitar) cables are TS. Do not use a guitar cable for speakers: the thin conductor and shielded construction are not made for speaker current.

Same plug diameter

Same signal type, other connector

All audio connectors

All 13 connectors in the Audio Jacks & Connectors chart →

Sources

  1. EIA RS-453 / IEC 60603-11: concentric phone plugs (0.206 in type); MIL-DTL-642 telephone plugs
  2. JEITA RC-8141C: 4.4 mm 5-pole (Pentaconn) headphone plug; Nippon DICS Pentaconn product data
  3. IEC 60268-12 / AES14: Application of connectors for broadcast and audio (XLR pin 1 shield, 2 hot, 3 cold)
  4. Neutrik: XLR and speakON (NL2, NL4) connector data sheets and wiring
  5. Switchcraft: 1/4 in and 3.5 mm phone plug drawings
  6. Wikipedia: Phone connector (audio): CTIA vs OMTP TRRS, balanced conventions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.