12 AWG Wire Size

AWG Wire Gauge

12 AWG solid wire is 0.0808 in (2.052 mm) in diameter, with a copper cross-section of 3.309 mm² (6,530 circular mils). Solid annealed copper of this size has a DC resistance of 5.211 Ω/km (1.588 Ω/1000 ft) at 20 °C.

dDiameter
2.052 mm0.0808 in0.0808 in2.052 mm
ACross-section
3.309 mm²
RDC resistance, copper 20 °C
5.211 Ω/km
Ampacity 75 °C (NEC)
25 A

Drawing

⌀2.052 mm⌀0.0808 inSolid3.309 mm²
⌀2.327 mm⌀0.0916 in7 × ⌀0.776 mm⌀0.0305 in7 strands, same area
Bare conductor without insulation; 7-strand shown as an uncompressed concentric lay.Drawn to scale · Dimensions in mmDimensions in inches

12 AWG specifications

dDiameter0.0808 in2.052 mm
ACross-section3.309 mm²
Circular mils6,530
RDC resistance, copper 20 °C5.211 Ω/km
RDC resistance, copper 20 °C1.588 Ω/1000 ft
Ampacity 60 °C (NEC)20 A
Ampacity 75 °C (NEC)25 A
Ampacity 90 °C (NEC)30 A
Next metric size up4 mm²

12 AWG is the standard size for 20 A circuits (kitchen, bathroom and laundry receptacles in the US). Metric 4 mm² has slightly more copper; 2.5 mm² has less and is not a substitute on a 20 A breaker.

Also known as

#12

Metric (IEC 60228) size with at least the same area

All AWG Wire Gauge sizes

Compare all 44 sizes in the AWG Wire Gauge chart →

Sources

  1. ASTM B258: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  2. NFPA 70, National Electrical Code (2023), Table 310.16: Ampacities of insulated conductors, 60/75/90 °C
  3. IEC 60028:1925, International standard of resistance for copper (annealed copper: 1/58 Ω·mm²/m at 20 °C)
  4. IEC 60228:2023, Conductors of insulated cables (metric nominal cross-sections)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.