18 AWG Wire Size
AWG Wire Gauge
18 AWG solid wire is 0.0403 in (1.024 mm) in diameter, with a copper cross-section of 0.823 mm² (1,624 circular mils). Solid annealed copper of this size has a DC resistance of 20.95 Ω/km (6.385 Ω/1000 ft) at 20 °C.
- dDiameter
- 1.024 mm0.0403 in0.0403 in1.024 mm
- ACross-section
- 0.823 mm²
- RDC resistance, copper 20 °C
- 20.95 Ω/km
Drawing
18 AWG specifications
| dDiameter | 0.0403 in1.024 mm |
|---|---|
| ACross-section | 0.823 mm² |
| Circular mils | 1,624 |
| RDC resistance, copper 20 °C | 20.95 Ω/km |
| RDC resistance, copper 20 °C | 6.385 Ω/1000 ft |
| Next metric size up | 1 mm² |
18 AWG is the common size for lamp cords, thermostat and doorbell wire, and low-current automotive signal wires. Its closest metric size is 0.75 mm² (slightly smaller); 1 mm² is larger.
Also known as
#18
Metric (IEC 60228) size with at least the same area
All AWG Wire Gauge sizes
Sources
- ASTM B258: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
- NFPA 70, National Electrical Code (2023), Table 310.16: Ampacities of insulated conductors, 60/75/90 °C
- IEC 60028:1925, International standard of resistance for copper (annealed copper: 1/58 Ω·mm²/m at 20 °C)
- IEC 60228:2023, Conductors of insulated cables (metric nominal cross-sections)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.