3/0 AWG Wire Size

AWG Wire Gauge

3/0 AWG solid wire is 0.4096 in (10.404 mm) in diameter, with a copper cross-section of 85.03 mm² (167,800 circular mils). Solid annealed copper of this size has a DC resistance of 0.2028 Ω/km (0.0618 Ω/1000 ft) at 20 °C.

dDiameter
10.404 mm0.4096 in0.4096 in10.404 mm
ACross-section
85.03 mm²
RDC resistance, copper 20 °C
0.2028 Ω/km
Ampacity 75 °C (NEC)
200 A

Drawing

⌀10.404 mm⌀0.4096 inSolid85.03 mm²
⌀11.797 mm⌀0.4644 in7 × ⌀3.932 mm⌀0.1548 in7 strands, same area
Bare conductor without insulation; 7-strand shown as an uncompressed concentric lay.Drawn to scale · Dimensions in mmDimensions in inches

3/0 AWG specifications

dDiameter0.4096 in10.404 mm
ACross-section85.03 mm²
Circular mils167,800
RDC resistance, copper 20 °C0.2028 Ω/km
RDC resistance, copper 20 °C0.0618 Ω/1000 ft
Ampacity 60 °C (NEC)165 A
Ampacity 75 °C (NEC)200 A
Ampacity 90 °C (NEC)225 A
Next metric size up95 mm²

Also known as

3/0000

Metric (IEC 60228) size with at least the same area

All AWG Wire Gauge sizes

Compare all 44 sizes in the AWG Wire Gauge chart →

Sources

  1. ASTM B258: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  2. NFPA 70, National Electrical Code (2023), Table 310.16: Ampacities of insulated conductors, 60/75/90 °C
  3. IEC 60028:1925, International standard of resistance for copper (annealed copper: 1/58 Ω·mm²/m at 20 °C)
  4. IEC 60228:2023, Conductors of insulated cables (metric nominal cross-sections)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.