4/0 AWG Wire Size

AWG Wire Gauge

4/0 AWG solid wire is 0.4600 in (11.684 mm) in diameter, with a copper cross-section of 107.2 mm² (211,600 circular mils). Solid annealed copper of this size has a DC resistance of 0.1608 Ω/km (0.049 Ω/1000 ft) at 20 °C.

dDiameter
11.684 mm0.4600 in0.4600 in11.684 mm
ACross-section
107.2 mm²
RDC resistance, copper 20 °C
0.1608 Ω/km
Ampacity 75 °C (NEC)
230 A

Drawing

⌀11.684 mm⌀0.4600 inSolid107.2 mm²
⌀13.248 mm⌀0.5216 in7 × ⌀4.416 mm⌀0.1739 in7 strands, same area
Bare conductor without insulation; 7-strand shown as an uncompressed concentric lay.Drawn to scale · Dimensions in mmDimensions in inches

4/0 AWG specifications

dDiameter0.4600 in11.684 mm
ACross-section107.2 mm²
Circular mils211,600
RDC resistance, copper 20 °C0.1608 Ω/km
RDC resistance, copper 20 °C0.049 Ω/1000 ft
Ampacity 60 °C (NEC)195 A
Ampacity 75 °C (NEC)230 A
Ampacity 90 °C (NEC)260 A
Next metric size up120 mm²

4/0 (0000) is the largest AWG size; above it, cable is sized in kcmil (250, 300, 350 kcmil …). 4/0 copper is rated 230 A at 75 °C. Note that 4/0 aluminum (rated 180 A at 75 °C) is common for 200 A residential services under the NEC 310.12 dwelling service rule, which permits 83 % of the service rating.

Also known as

4/00000

Metric (IEC 60228) size with at least the same area

All AWG Wire Gauge sizes

Compare all 44 sizes in the AWG Wire Gauge chart →

Sources

  1. ASTM B258: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  2. NFPA 70, National Electrical Code (2023), Table 310.16: Ampacities of insulated conductors, 60/75/90 °C
  3. IEC 60028:1925, International standard of resistance for copper (annealed copper: 1/58 Ω·mm²/m at 20 °C)
  4. IEC 60228:2023, Conductors of insulated cables (metric nominal cross-sections)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.