30 AWG Wire Size

AWG Wire Gauge

30 AWG solid wire is 0.0100 in (0.254 mm) in diameter, with a copper cross-section of 0.0509 mm² (100.5 circular mils). Solid annealed copper of this size has a DC resistance of 338.5 Ω/km (103.2 Ω/1000 ft) at 20 °C.

dDiameter
0.254 mm0.0100 in0.0100 in0.254 mm
ACross-section
0.0509 mm²
RDC resistance, copper 20 °C
338.5 Ω/km

Drawing

⌀0.254 mm⌀0.0100 inSolid0.05093 mm²
⌀0.288 mm⌀0.0113 in7 × ⌀0.096 mm⌀0.0038 in7 strands, same area
Bare conductor without insulation; 7-strand shown as an uncompressed concentric lay.Drawn to scale · Dimensions in mmDimensions in inches

30 AWG specifications

dDiameter0.0100 in0.254 mm
ACross-section0.0509 mm²
Circular mils100.5
RDC resistance, copper 20 °C338.5 Ω/km
RDC resistance, copper 20 °C103.2 Ω/1000 ft

30 AWG (0.010 in, 0.25 mm) is the standard size for wire-wrap wire.

Also known as

#30

All AWG Wire Gauge sizes

Compare all 44 sizes in the AWG Wire Gauge chart →

Sources

  1. ASTM B258: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  2. NFPA 70, National Electrical Code (2023), Table 310.16: Ampacities of insulated conductors, 60/75/90 °C
  3. IEC 60028:1925, International standard of resistance for copper (annealed copper: 1/58 Ω·mm²/m at 20 °C)
  4. IEC 60228:2023, Conductors of insulated cables (metric nominal cross-sections)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.