31 AWG Wire Size

AWG Wire Gauge

31 AWG solid wire is 0.0089 in (0.226 mm) in diameter, with a copper cross-section of 0.0404 mm² (79.7 circular mils). Solid annealed copper of this size has a DC resistance of 426.9 Ω/km (130.1 Ω/1000 ft) at 20 °C.

dDiameter
0.226 mm0.0089 in0.0089 in0.226 mm
ACross-section
0.0404 mm²
RDC resistance, copper 20 °C
426.9 Ω/km

Drawing

⌀0.226 mm⌀0.0089 inSolid0.04039 mm²
⌀0.256 mm⌀0.0101 in7 × ⌀0.085 mm⌀0.0034 in7 strands, same area
Bare conductor without insulation; 7-strand shown as an uncompressed concentric lay.Drawn to scale · Dimensions in mmDimensions in inches

31 AWG specifications

dDiameter0.0089 in0.226 mm
ACross-section0.0404 mm²
Circular mils79.7
RDC resistance, copper 20 °C426.9 Ω/km
RDC resistance, copper 20 °C130.1 Ω/1000 ft

Also known as

#31

All AWG Wire Gauge sizes

Compare all 44 sizes in the AWG Wire Gauge chart →

Sources

  1. ASTM B258: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  2. NFPA 70, National Electrical Code (2023), Table 310.16: Ampacities of insulated conductors, 60/75/90 °C
  3. IEC 60028:1925, International standard of resistance for copper (annealed copper: 1/58 Ω·mm²/m at 20 °C)
  4. IEC 60228:2023, Conductors of insulated cables (metric nominal cross-sections)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.