Ball Bearing Size Chart

Boundary dimensions of deep groove ball bearings: the bore (d), outside diameter (D) and width (B) that decide whether a bearing fits. These are fixed by ISO 15, so a 6204 from any manufacturer has the same 20 × 47 × 14 mm envelope.

117 sizesChecked 2026-11-153 sources
Shaft ⌀20 mm680432×7690437×91600442×8600442×12620447×14630452×15640472×19
Same 20 mm shaft, seven series: thin-section 68 to heavy 64.Drawn to scale · Dimensions in mmDimensions in inches

Size chartTap a size for its drawing and full specs

117 of 117
BearingdBore diametermminDOutside diametermminBWidthmminrChamfer (min.)mmin
Miniature and small (6xx)
62330.118100.39440.1570.150.006
62440.157130.51250.1970.20.008
63440.157160.63050.1970.30.012
62550.197160.63050.1970.30.012
63550.197190.74860.2360.30.012
62660.236190.74860.2360.30.012
63660.236220.86670.2760.30.012
62770.276220.86670.2760.30.012
60770.276190.74860.2360.30.012
60880.315220.86670.2760.30.012
62880.315240.94580.3150.30.012
63880.315281.10290.3540.30.012
60990.354240.94570.2760.30.012
62990.354261.02480.3150.30.012
68 series, thin section
6800100.394190.74850.1970.30.012
6801120.472210.82750.1970.30.012
6802150.591240.94550.1970.30.012
6803170.669261.02450.1970.30.012
6804200.787321.26070.2760.30.012
6805250.984371.45770.2760.30.012
6806301.181421.65470.2760.30.012
6807351.378471.85070.2760.30.012
6808401.575522.04770.2760.30.012
6809451.772582.28370.2760.30.012
6810501.969652.55970.2760.30.012
6811552.165722.83590.3540.30.012
6812602.362783.071100.3940.30.012
69 series, extra light
6900100.394220.86660.2360.30.012
6901120.472240.94560.2360.30.012
6902150.591281.10270.2760.30.012
6903170.669301.18170.2760.30.012
6904200.787371.45790.3540.30.012
6905250.984421.65490.3540.30.012
6906301.181471.85090.3540.30.012
6907351.378552.165100.3940.60.024
6908401.575622.441120.4720.60.024
6909451.772682.677120.4720.60.024
6910501.969722.835120.4720.60.024
6911552.165803.150130.51210.039
6912602.362853.346130.51210.039
160 series, extra light, narrow
16001120.472281.10270.2760.30.012
16002150.591321.26080.3150.30.012
16003170.669351.37880.3150.30.012
16004200.787421.65480.3150.30.012
16005250.984471.85080.3150.30.012
16006301.181552.16590.3540.30.012
60 series, extra light
6000100.394261.02480.3150.30.012
6001120.472281.10280.3150.30.012
6002150.591321.26090.3540.30.012
6003170.669351.378100.3940.30.012
6004200.787421.654120.4720.60.024
6005250.984471.850120.4720.60.024
6006301.181552.165130.51210.039
6007351.378622.441140.55110.039
6008401.575682.677150.59110.039
6009451.772752.953160.63010.039
6010501.969803.150160.63010.039
6011552.165903.543180.7091.10.043
6012602.362953.740180.7091.10.043
6013652.5591003.937180.7091.10.043
6014702.7561104.331200.7871.10.043
6015752.9531154.528200.7871.10.043
6016803.1501254.921220.8661.10.043
6017853.3461305.118220.8661.10.043
6018903.5431405.512240.9451.50.059
6019953.7401455.709240.9451.50.059
60201003.9371505.906240.9451.50.059
62 series, light
6200100.394301.18190.3540.60.024
6201120.472321.260100.3940.60.024
6202150.591351.378110.4330.60.024
6203170.669401.575120.4720.60.024
6204200.787471.850140.55110.039
6205250.984522.047150.59110.039
6206301.181622.441160.63010.039
6207351.378722.835170.6691.10.043
6208401.575803.150180.7091.10.043
6209451.772853.346190.7481.10.043
6210501.969903.543200.7871.10.043
6211552.1651003.937210.8271.50.059
6212602.3621104.331220.8661.50.059
6213652.5591204.724230.9061.50.059
6214702.7561254.921240.9451.50.059
6215752.9531305.118250.9841.50.059
6216803.1501405.512261.02420.079
6217853.3461505.906281.10220.079
6218903.5431606.299301.18120.079
6219953.7401706.693321.2602.10.083
62201003.9371807.087341.3392.10.083
63 series, medium
6300100.394351.378110.4330.60.024
6301120.472371.457120.47210.039
6302150.591421.654130.51210.039
6303170.669471.850140.55110.039
6304200.787522.047150.5911.10.043
6305250.984622.441170.6691.10.043
6306301.181722.835190.7481.10.043
6307351.378803.150210.8271.50.059
6308401.575903.543230.9061.50.059
6309451.7721003.937250.9841.50.059
6310501.9691104.331271.06320.079
6311552.1651204.724291.14220.079
6312602.3621305.118311.2202.10.083
6313652.5591405.512331.2992.10.083
6314702.7561505.906351.3782.10.083
6315752.9531606.299371.4572.10.083
6316803.1501706.693391.5352.10.083
6317853.3461807.087411.61430.118
6318903.5431907.480431.69330.118
6319953.7402007.874451.77230.118
63201003.9372158.465471.85030.118
64 series, heavy
6403170.669622.441170.6691.10.043
6404200.787722.835190.7481.10.043
6405250.984803.150210.8271.50.059
6406301.181903.543230.9061.50.059
6407351.3781003.937250.9841.50.059
6408401.5751104.331271.06320.079
6409451.7721204.724291.14220.079
6410501.9691305.118311.2202.10.083

How to read a bearing number

A deep groove ball bearing number such as 6204-2RS C3 has three parts. The first digit, 6, is the bearing type: deep groove ball bearing. The next digit is the dimension series: 2 means the light series, where 0 is extra light, 3 medium and 4 heavy; an 8 or 9 means a thin-section bearing. The last two digits, 04, are the bore code.

For bore codes 04 and above, multiply by five to get the bore in millimetres: 04 × 5 = 20 mm, 10 × 5 = 50 mm. The four smallest codes are exceptions: 00 = 10 mm, 01 = 12 mm, 02 = 15 mm, 03 = 17 mm. Miniature bearings with a single digit after the 6x prefix give the bore directly: a 608 has an 8 mm bore.

Suffixes describe the closure and the internal fit. Z or ZZ / 2Z are metal shields (one or both sides); RS or 2RS are rubber contact seals (other makers write LLU, DDU or 2RSH); N adds a snap-ring groove. C3 means internal clearance larger than normal, common for electric motors; C2 is tighter than normal. None of these change the boundary dimensions in the chart.

About Ball Bearings

Deep groove ball bearings are the most common rolling bearings: they carry radial loads and moderate axial loads in both directions, run fast and need little maintenance. Every size on this page is defined by ISO 15, which fixes the bore, outside diameter, width and minimum chamfer for each dimension series. That is why bearings from SKF, NSK, NTN, FAG, Timken or a generic supplier are interchangeable by number.

What is not standardised is everything inside the envelope: ball size and count, cage material, seals, and therefore load ratings and speed limits. Those can differ by 10–30 % between brands, so we do not list them here. Take them from the catalogue of the brand you buy.

To pick a replacement, measure the bore and outside diameter with a caliper, then the width. Find the row in the chart that matches all three. If you know only the shaft diameter, the same bore usually exists in several series, so compare them under each size.

Choosing a series for the same shaft

For one bore size, moving from the 68 to the 64 series gives a larger outside diameter and width, larger balls and higher load capacity, at the cost of space and weight. The 62 series is the usual first choice; 60 and 69 save radial space; 63 and 64 suit heavy or shock loads.

Chamfer dimension

The chamfer value r is the smallest corner radius on the rings. The fillet on the shaft or in the housing must be smaller than this, or the bearing will not seat against the shoulder.

Questions

What size is a 6204 bearing?

A 6204 is 20 mm bore, 47 mm outside diameter and 14 mm wide (0.787 × 1.850 × 0.551 in). The same applies to 6204-2RS, 6204ZZ and every other suffix.

Do 2RS, ZZ and open bearings have the same dimensions?

Yes. Seals and shields fit inside the standard envelope, so 6205, 6205-2RS and 6205-ZZ are all 25 × 52 × 15 mm. They differ in sealing, friction and maximum speed.

How do I find the bore from the bearing number?

Take the last two digits and multiply by 5 (for 04 and above): 6206 → 06 × 5 = 30 mm. Codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm. Miniature bearings like 608 or 625 show the bore directly: 8 mm and 5 mm.

Are bearings from different brands interchangeable?

For the boundary dimensions, yes. They all follow ISO 15. Load ratings, speed limits, noise and seal quality are brand-specific, so check the replacement's catalogue values for demanding applications.

What does C3 mean on a bearing?

C3 is an internal radial clearance larger than normal (CN). It leaves room for thermal expansion and tight interference fits, which is why most electric motor bearings are C3.

Sources

  1. ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
  2. SKF: Deep groove ball bearings, product tables
  3. NSK: Rolling bearings catalogue (CAT. E1102), deep groove ball bearings

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.