Belt Size Chart: Waist to Belt Size, cm Lengths and Widths
Buy a belt 2 in larger than your trouser waist size: 34 in trousers take a size 36 belt, about 90 cm in metric sizes. The size is the length from the buckle fold to the middle hole, so you have two holes either way.
Belt size chartMetric size = (waist + 2 in) in cm, nearest 5 cm
| Belt size | Trouser waist sizemmin | Metric size (cm) | Letter | Widthmmin | Typical use |
|---|---|---|---|---|---|
| Belt size by waist | |||||
| 28 | 66026 | 70 | XS | — | — |
| 30 | 71128 | 75 | XS | — | — |
| 32 | 76230 | 80 | S | — | — |
| 34 | 81332 | 85 | M | — | — |
| 36 | 86434 | 90 | M | — | — |
| 38 | 91436 | 95 | L | — | — |
| 40 | 96538 | 100 | L | — | — |
| 42 | 101640 | 105 | XL | — | — |
| 44 | 106742 | 110 | XL | — | — |
| 46 | 111844 | 115 | XXL | — | — |
| 48 | 116846 | 120 | XXL | — | — |
| 50 | 121948 | 125 | 3XL | — | — |
| 52 | 127050 | 130 | 3XL | — | — |
| Belt widths | |||||
| ¾″ | — | — | — | 193/4 | Women's fashion, thin |
| 1″ | — | — | — | 251 | Women's dress, narrow men's dress |
| 1¼″ | — | — | — | 321 1/4 | Men's dress belt |
| 1⅜″ | — | — | — | 351 3/8 | Business-casual, chinos |
| 1½″ | — | — | — | 381 1/2 | Jeans and casual |
| 1¾″ | — | — | — | 441 3/4 | Work and heavy-duty, gun belts |
| 2″ | — | — | — | 512 | Wide fashion, tool belts |
No exact match. The nearest sizes:
How a belt is measured
Belt size = distance from the fold where the strap wraps the buckle bar (not the buckle tip) to the middle hole. Most belts have five holes 1 in (25 mm) apart, so a size 36 fits from about 34 to 38 in around the trousers.
The + 2 in rule works because you wear a belt over the trousers, which add thickness, and because trouser waist labels are nominal. If you measure around the trousers through the loops instead, buy that number directly.
Metric belts state the same length in cm, usually in 5 cm steps (85, 90, 95). Some European makers state total length instead; check whether the number is to the middle hole.
Width must fit the belt loops: dress trousers have loops for 1¼ in (32 mm) belts, jeans for 1½ in (38 mm); a 1¾ in work belt will not pass through dress loops.
About Belt Sizes
The quickest check is a belt that already fits: lay it flat and measure from the buckle fold to the hole you use, then buy that size (or the nearest one with your hole in the middle).
Cut-to-fit belts (ratchet or plaque buckles) are trimmed from the buckle end; measure your waist over the trousers and cut 1 in at a time.
Questions
What size belt for 32 waist?
Size 34 (about 85–86 cm). Measured from buckle fold to the middle hole.
What is belt size 100 cm in inches?
About 39–40 in, which suits trousers with a 38 in waist.
What width is a standard men's dress belt?
1¼ in (32 mm). Casual belts and jeans belts are 1½ in (38 mm).
Should I go up or down if between belt sizes?
Up. A slightly long belt uses an inner hole; a short one cannot reach the middle.
Sources
- Tanner Goods / Leather belt makers: belt size = waist + 2 in, measured buckle fold to centre hole
- EN 13402-3:2017, waist girth as the primary dimension (basis of metric belt lengths)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.