Watch Band Size Chart: Lug Width and Strap Length
A strap must match the lug width, the gap between the lugs in mm. 18, 20 and 22 mm are the most common widths; 19 and 21 mm exist on some dress and vintage watches. Strap length is given as two numbers, long piece / buckle piece.
Watch band chartLug width in mm; even widths are the most common
| Size | Lug widthmmin |
|---|---|
| 8 mm | 80.31 |
| 10 mm | 100.39 |
| 12 mm | 120.47 |
| 14 mm | 140.55 |
| 16 mm | 160.63 |
| 17 mm | 170.67 |
| 18 mm | 180.71 |
| 19 mm | 190.75 |
| 20 mm | 200.79 |
| 21 mm | 210.83 |
| 22 mm | 220.87 |
| 24 mm | 240.94 |
| 26 mm | 261.02 |
No exact match. The nearest sizes:
How strap sizes are given
Lug width is the inside distance between the lugs, equal to the strap width at the case end. Many straps taper toward the buckle (20 mm to 16 mm, written 20/16). The watch's specification or the back of an original strap usually prints the width.
Strap length is given as two numbers: the long (hole) piece and the short (buckle) piece, measured from the spring bar to the tip, without the buckle. Makers sell short, regular and long sets; compare with the strap you wear now.
Spring bars hold the strap: 1.5–1.8 mm diameter for most watches, thicker (2.0–2.5 mm) on sports and dive watches. Match the bar to the lug holes and the strap's tube.
Apple Watch bands fit by case group, not lug width: bands for 38, 40 and 41 mm cases fit each other, and bands for 42 (Series 1–3), 44, 45 and 49 mm fit each other. Check Apple's compatibility list for the newest case sizes.
About Watch Band Sizes
To measure lug width, remove the strap or measure the strap's width at the very end where it meets the case. A caliper is best; a ruler works if you read to the half millimetre and round to the nearest even number (or 19/21 for watches known to use them).
To check length, lay your current strap flat and measure both pieces from the spring-bar end to the tip, leaving out the buckle. If you use the last or first hole, step to the long or short set.
Questions
How do I find my watch's lug width?
Measure the inside distance between the lugs in mm, or read it from the watch's specification or the back of an original strap.
Can I use a 22 mm strap on a 20 mm watch?
Not without trimming; it will not fit between the lugs. The opposite (20 mm in 22 mm lugs) leaves a visible gap and lets the strap slide.
How is watch strap length given?
As two numbers in mm: the long (hole) piece and the short (buckle) piece, each measured from the spring bar to the tip without the buckle.
Do Apple Watch 41 mm and 45 mm bands interchange?
No. 41 mm bands fit 38/40/41 mm cases; 45 mm bands fit 42 (older)/44/45/49 mm cases.
Sources
- Hirsch: Strap sizes and lengths (lug width, short/regular/long)
- Apple: Band compatibility for Apple Watch case sizes
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.