4.0 mm (5/32") Blind Rivet: Drill Size and Head

Blind Rivets

A 4.0 mm (5/32") blind rivet needs a 4.1 mm (0.161 in) hole. The dome head is typically 8.0 mm (0.315 in) in diameter.

dDiameter
4.0 mm0.157 in0.157 in4.0 mm
d3Recommended hole
4.1 mm0.161 in0.161 in4.1 mm
dkDome head diameter (typical)
8.0 mm0.315 in0.315 in8.0 mm
Inch drill (IFI)
#20 (0.161 in)

Drawing

⌀8.0 mm⌀0.315 in⌀4.0 mm⌀0.157 in
Rivet before setting, with mandrelDrawn to scale · Dimensions in mmDimensions in inches

4.0 mm (5/32") specifications

dDiameter4.0 mm0.157 in
d3Recommended hole4.1 mm0.161 in
dkDome head diameter (typical)8.0 mm0.315 in
Inch equivalent5/32 in
Inch drill (IFI)#20 (0.161 in)

4.0 mm / 5/32 in: hole 4.1 mm or #20 drill (0.161 in).

All Blind Rivets sizes

Compare all 8 sizes in the Blind Rivets chart →

Sources

  1. DIN 7337: Blind rivets with break pull mandrel (superseded by the ISO 15977–15984 series)
  2. IFI-114: Break mandrel blind rivets (inch)
  3. Westfield Fasteners: DIN 7337 blind rivets, joint hole table
  4. Timco: Rivets technical data sheet
  5. Rivelit: Standard blind rivets DIN 7337 catalogue

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.