4.8 mm (3/16") Blind Rivet: Drill Size and Head

Blind Rivets

A 4.8 mm (3/16") blind rivet needs a 4.9 mm (0.193 in) hole. The dome head is typically 9.5 mm (0.374 in) in diameter.

dDiameter
4.8 mm0.189 in0.189 in4.8 mm
d3Recommended hole
4.9 mm0.193 in0.193 in4.9 mm
dkDome head diameter (typical)
9.5 mm0.374 in0.374 in9.5 mm
Inch drill (IFI)
#11 (0.191 in)

Drawing

⌀9.5 mm⌀0.374 in⌀4.8 mm⌀0.189 in
Rivet before setting, with mandrelDrawn to scale · Dimensions in mmDimensions in inches

4.8 mm (3/16") specifications

dDiameter4.8 mm0.189 in
d3Recommended hole4.9 mm0.193 in
dkDome head diameter (typical)9.5 mm0.374 in
Inch equivalent3/16 in
Inch drill (IFI)#11 (0.191 in)

4.8 mm / 3/16 in: hole 4.9 mm or #11 drill (0.191 in).

All Blind Rivets sizes

Compare all 8 sizes in the Blind Rivets chart →

Sources

  1. DIN 7337: Blind rivets with break pull mandrel (superseded by the ISO 15977–15984 series)
  2. IFI-114: Break mandrel blind rivets (inch)
  3. Westfield Fasteners: DIN 7337 blind rivets, joint hole table
  4. Timco: Rivets technical data sheet
  5. Rivelit: Standard blind rivets DIN 7337 catalogue

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.