38 mm 3-start Neck Finish Dimensions

Bottle Cap Threads · PET beverage necks (PCO, 3-start)

The 38 mm 3-start is a PET beverage neck finish, EN 16068 / CETIE GME 30.25.

HFinish height
16.5 mm0.650 in0.650 in16.5 mm

38 mm 3-start specifications

HFinish height16.5 mm0.650 in
Starts3
StandardEN 16068 / CETIE GME 30.25

Three thread starts, finish height 16.5 mm. Used for juice, dairy and still water, including aseptic filling and nitrogen dosing. The thread pitch is defined in EN 16068 and CETIE GME 30.25 and is not given here.

Other beverage necks

All Bottle Cap Threads sizes

Compare all 20 sizes in the Bottle Cap Threads chart →

Sources

  1. CKS Packaging: S.P.I. Specifications (T, H 400/410/415, S, I, threads per inch, max/min in inches)
  2. BOSL2 OpenSCAD library, bottlecaps.scad: SPI thread table (from ISBT thread specs) and PCO 1810/1881 neck geometry
  3. 3plastics: Plastic bottle cap threads specifications (T with tolerances): cross-check
  4. Multidesign: Neck finishes glossary (400 series S, pitch, H, I; PCO and 38 mm three-start): cross-check
  5. Contapack: Selected SPI neck finish specifications (mm): cross-check
  6. Wikipedia: Plastic bottle, PCO 1881 (17 mm finish height, 3.8 g neck, ISBT voluntary guideline)
  7. ISBT Threadspecs (PCO 1881 drawing 3784253-21)
  8. CETIE: Finish data sheets (GME 30.25, 38 mm three-start, 16.50 mm height)
  9. PETmolder: What is PCO 1881 neck finish (neck weight 3.8 g): cross-check

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.