PCO 1881 Neck Finish Dimensions

Bottle Cap Threads · PET beverage necks (PCO, 3-start)

The PCO 1881 is a PET beverage neck finish, ISBT PCO 1881.

HFinish height
17 mm0.669 in0.669 in17 mm
PPitch
2.70 mm0.106 in0.106 in2.70 mm

PCO 1881 specifications

HFinish height17 mm0.669 in
PPitch2.70 mm0.106 in
Thread turns1.8 (650°)
Starts1
Neck weight (about)3.8 g
StandardISBT PCO 1881

Finish height 17 mm, 2.7 mm pitch with about 650° of thread, neck about 3.8 g. Thread diameter and E are not listed here: the public sources give them from one drawing only.

Other beverage necks

All Bottle Cap Threads sizes

Compare all 20 sizes in the Bottle Cap Threads chart →

Sources

  1. CKS Packaging: S.P.I. Specifications (T, H 400/410/415, S, I, threads per inch, max/min in inches)
  2. BOSL2 OpenSCAD library, bottlecaps.scad: SPI thread table (from ISBT thread specs) and PCO 1810/1881 neck geometry
  3. 3plastics: Plastic bottle cap threads specifications (T with tolerances): cross-check
  4. Multidesign: Neck finishes glossary (400 series S, pitch, H, I; PCO and 38 mm three-start): cross-check
  5. Contapack: Selected SPI neck finish specifications (mm): cross-check
  6. Wikipedia: Plastic bottle, PCO 1881 (17 mm finish height, 3.8 g neck, ISBT voluntary guideline)
  7. ISBT Threadspecs (PCO 1881 drawing 3784253-21)
  8. CETIE: Finish data sheets (GME 30.25, 38 mm three-start, 16.50 mm height)
  9. PETmolder: What is PCO 1881 neck finish (neck weight 3.8 g): cross-check

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.