BSA / English Bottom Bracket Dimensions

Bottom Brackets · Threaded shells

A BSA / English bottom bracket shell is 68 mm (2.68 in) wide with a 34.8 mm (1.370 in) inside diameter (Threaded shells). Bearings: outboard cups (modern) or cartridge inside. Crank spindles available for this shell: 24 mm, GXP 24/22, DUB 28.99, 30 mm (narrow-bearing BBs), square taper.

WShell width
68 mm2.68 in2.68 in68 mm
⌀Shell inside diameter
34.8 mm1.370 in1.370 in34.8 mm
Thread
1.370″ × 24 TPI

Drawing

68 mm2.68 in⌀34.8 mm⌀1.370 inSection through the shell: threaded at both ends
Drawn to scale · Dimensions in mmDimensions in inches

BSA / English specifications

WShell width68 mm2.68 in
Alternative shell width73 mm2.87 in
⌀Shell inside diameter34.8 mm1.370 in
Thread1.370″ × 24 TPI
Drive-side thread directionLeft-hand (reverse), tightens anticlockwise
Bearingsoutboard cups (modern) or cartridge inside
Crank spindles available24 mm, GXP 24/22, DUB 28.99, 30 mm (narrow-bearing BBs), square taper

Thread diameter 1.370 in (34.8 mm), 24 threads per inch. Modern external-bearing BSA cups are removed with a 16-notch cup tool (the common Shimano/SRAM type).

Also known as

BSAEnglishISOBC1.37x24

All Bottom Brackets sizes

Compare all 15 sizes in the Bottom Brackets chart →

Sources

  1. Park Tool: Bottom bracket standards and terminology
  2. Sheldon Brown: Threaded bottom bracket crib sheet
  3. Sheldon Brown: Unthreaded bottom bracket crib sheet
  4. Wheels Manufacturing: Bottom bracket standards chart
  5. BikeRadar: The complete guide to bottom bracket standards

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.