Italian Bottom Bracket Dimensions

Bottom Brackets · Threaded shells

A Italian bottom bracket shell is 70 mm (2.76 in) wide with a 36 mm (1.417 in) inside diameter (Threaded shells). Bearings: outboard cups or cartridge inside. Crank spindles available for this shell: 24 mm, GXP 24/22, DUB 28.99, square taper.

WShell width
70 mm2.76 in2.76 in70 mm
⌀Shell inside diameter
36 mm1.417 in1.417 in36 mm
Thread
M36 × 24 TPI

Drawing

70 mm2.76 in⌀36 mm⌀1.417 inSection through the shell: threaded at both ends
Drawn to scale · Dimensions in mmDimensions in inches

Italian specifications

WShell width70 mm2.76 in
⌀Shell inside diameter36 mm1.417 in
ThreadM36 × 24 TPI
Drive-side thread directionRight-hand, tightens clockwise
Bearingsoutboard cups or cartridge inside
Crank spindles available24 mm, GXP 24/22, DUB 28.99, square taper

Also known as

ITA

All Bottom Brackets sizes

Compare all 15 sizes in the Bottom Brackets chart →

Sources

  1. Park Tool: Bottom bracket standards and terminology
  2. Sheldon Brown: Threaded bottom bracket crib sheet
  3. Sheldon Brown: Unthreaded bottom bracket crib sheet
  4. Wheels Manufacturing: Bottom bracket standards chart
  5. BikeRadar: The complete guide to bottom bracket standards

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.