C9×15 Channel Dimensions & Properties

C & MC Channels (AISC) · C shapes: American Standard channels

C9×15 is an AISC C shapes: American Standard channels channel. It is 9 in (228.6 mm) deep with a 2.49 in (63.2 mm) flange, a 0.285 in (7.2 mm) web and an average flange thickness of 0.413 in (10.5 mm), and weighs 15 lb/ft (22.3 kg/m). Area 4.4 in² (2,839 mm²); centroid 0.586 in (14.9 mm) from the back of the web; Ix = 51 in⁴ (2,122.8 cm⁴), Sx = 11.3 in³ (185.2 cm³).

dDepth
228.6 mm9 in9 in228.6 mm
bfFlange width
63.2 mm2.49 in2.49 in63.2 mm
twWeb thickness
7.2 mm0.285 in0.285 in7.2 mm
tfFlange thickness (average)
10.5 mm0.413 in0.413 in10.5 mm

Drawing

63.2 mm2.49 in228.6 mm9 intf 10.5 mmtf 0.413 intw 7.2 mmtw 0.285 ine 14.9 mme 0.586 in
Drawn to scale · Dimensions in mmDimensions in inches

C9×15 specifications

dDepth9 in228.6 mm
bfFlange width2.49 in63.2 mm
twWeb thickness0.285 in7.2 mm
tfFlange thickness (average)0.413 in10.5 mm
kDesign value1 in25.4 mm
kDetailing value1 in25.4 mm
WWeight15 lb/ft22.3 kg/m
AArea4.4 in²2,839 mm²
x̄Centroid from back of web0.586 in14.9 mm
eoShear centre from web0.681 in17.3 mm
IxMoment of inertia, strong axis51 in⁴2,122.8 cm⁴
ZxPlastic modulus, strong axis13.6 in³222.9 cm³
SxSection modulus, strong axis11.3 in³185.2 cm³
rxRadius of gyration, strong axis3.4 in86.4 mm
IyMoment of inertia, weak axis1.91 in⁴79.5 cm⁴
ZyPlastic modulus, weak axis2.04 in³33.4 cm³
SySection modulus, weak axis1.01 in³16.6 cm³
ryRadius of gyration, weak axis0.66 in16.7 mm
JTorsional constant0.208 in⁴8.66 cm⁴
Metric designationC230×22

Also known as

C230×22

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.