MC9×23.9 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC9×23.9 is an AISC MC shapes: miscellaneous channels channel. It is 9 in (228.6 mm) deep with a 3.45 in (87.6 mm) flange, a 0.4 in (10.2 mm) web and an average flange thickness of 0.55 in (14.0 mm), and weighs 23.9 lb/ft (35.6 kg/m). Area 7.02 in² (4,529 mm²); centroid 0.981 in (24.9 mm) from the back of the web; Ix = 84.9 in⁴ (3,533.8 cm⁴), Sx = 18.9 in³ (309.7 cm³).

dDepth
228.6 mm9 in9 in228.6 mm
bfFlange width
87.6 mm3.45 in3.45 in87.6 mm
twWeb thickness
10.2 mm0.4 in0.4 in10.2 mm
tfFlange thickness (average)
14.0 mm0.55 in0.55 in14.0 mm

Drawing

87.6 mm3.45 in228.6 mm9 intf 14.0 mmtf 0.55 intw 10.2 mmtw 0.4 ine 24.9 mme 0.981 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC9×23.9 specifications

dDepth9 in228.6 mm
bfFlange width3.45 in87.6 mm
twWeb thickness0.4 in10.2 mm
tfFlange thickness (average)0.55 in14.0 mm
kDesign value1.25 in31.8 mm
kDetailing value1 1/4 in31.8 mm
WWeight23.9 lb/ft35.6 kg/m
AArea7.02 in²4,529 mm²
x̄Centroid from back of web0.981 in24.9 mm
eoShear centre from web1.04 in26.4 mm
IxMoment of inertia, strong axis84.9 in⁴3,533.8 cm⁴
ZxPlastic modulus, strong axis22.5 in³368.7 cm³
SxSection modulus, strong axis18.9 in³309.7 cm³
rxRadius of gyration, strong axis3.48 in88.4 mm
IyMoment of inertia, weak axis7.14 in⁴297.2 cm⁴
ZyPlastic modulus, weak axis5.51 in³90.3 cm³
SySection modulus, weak axis2.89 in³47.4 cm³
ryRadius of gyration, weak axis1.01 in25.7 mm
JTorsional constant0.599 in⁴24.93 cm⁴
Metric designationMC230×35.6

Also known as

MC230×35.6

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.