C9×20 Channel Dimensions & Properties

C & MC Channels (AISC) · C shapes: American Standard channels

C9×20 is an AISC C shapes: American Standard channels channel. It is 9 in (228.6 mm) deep with a 2.65 in (67.3 mm) flange, a 0.448 in (11.4 mm) web and an average flange thickness of 0.413 in (10.5 mm), and weighs 20 lb/ft (29.8 kg/m). Area 5.87 in² (3,787 mm²); centroid 0.583 in (14.8 mm) from the back of the web; Ix = 60.9 in⁴ (2,534.8 cm⁴), Sx = 13.5 in³ (221.2 cm³).

dDepth
228.6 mm9 in9 in228.6 mm
bfFlange width
67.3 mm2.65 in2.65 in67.3 mm
twWeb thickness
11.4 mm0.448 in0.448 in11.4 mm
tfFlange thickness (average)
10.5 mm0.413 in0.413 in10.5 mm

Drawing

67.3 mm2.65 in228.6 mm9 intf 10.5 mmtf 0.413 intw 11.4 mmtw 0.448 ine 14.8 mme 0.583 in
Drawn to scale · Dimensions in mmDimensions in inches

C9×20 specifications

dDepth9 in228.6 mm
bfFlange width2.65 in67.3 mm
twWeb thickness0.448 in11.4 mm
tfFlange thickness (average)0.413 in10.5 mm
kDesign value1 in25.4 mm
kDetailing value1 in25.4 mm
WWeight20 lb/ft29.8 kg/m
AArea5.87 in²3,787 mm²
x̄Centroid from back of web0.583 in14.8 mm
eoShear centre from web0.515 in13.1 mm
IxMoment of inertia, strong axis60.9 in⁴2,534.8 cm⁴
ZxPlastic modulus, strong axis16.9 in³276.9 cm³
SxSection modulus, strong axis13.5 in³221.2 cm³
rxRadius of gyration, strong axis3.22 in81.8 mm
IyMoment of inertia, weak axis2.41 in⁴100.3 cm⁴
ZyPlastic modulus, weak axis2.46 in³40.3 cm³
SySection modulus, weak axis1.17 in³19.2 cm³
ryRadius of gyration, weak axis0.64 in16.3 mm
JTorsional constant0.427 in⁴17.77 cm⁴
Metric designationC230×30

Also known as

C230×30

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.