MC12×45 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC12×45 is an AISC MC shapes: miscellaneous channels channel. It is 12 in (304.8 mm) deep with a 4.01 in (101.9 mm) flange, a 0.71 in (18.0 mm) web and an average flange thickness of 0.7 in (17.8 mm), and weighs 45 lb/ft (67.0 kg/m). Area 13.2 in² (8,516 mm²); centroid 1.04 in (26.4 mm) from the back of the web; Ix = 251 in⁴ (10,447.4 cm⁴), Sx = 41.9 in³ (686.6 cm³).

dDepth
304.8 mm12 in12 in304.8 mm
bfFlange width
101.9 mm4.01 in4.01 in101.9 mm
twWeb thickness
18.0 mm0.71 in0.71 in18.0 mm
tfFlange thickness (average)
17.8 mm0.7 in0.7 in17.8 mm

Drawing

101.9 mm4.01 in304.8 mm12 intf 17.8 mmtf 0.7 intw 18.0 mmtw 0.71 ine 26.4 mme 1.04 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC12×45 specifications

dDepth12 in304.8 mm
bfFlange width4.01 in101.9 mm
twWeb thickness0.71 in18.0 mm
tfFlange thickness (average)0.7 in17.8 mm
kDesign value1.31 in33.3 mm
kDetailing value1 5/16 in33.3 mm
WWeight45 lb/ft67.0 kg/m
AArea13.2 in²8,516 mm²
x̄Centroid from back of web1.04 in26.4 mm
eoShear centre from web0.844 in21.4 mm
IxMoment of inertia, strong axis251 in⁴10,447.4 cm⁴
ZxPlastic modulus, strong axis52 in³852.1 cm³
SxSection modulus, strong axis41.9 in³686.6 cm³
rxRadius of gyration, strong axis4.36 in110.7 mm
IyMoment of inertia, weak axis15.8 in⁴657.6 cm⁴
ZyPlastic modulus, weak axis10.1 in³165.5 cm³
SySection modulus, weak axis5.3 in³86.9 cm³
ryRadius of gyration, weak axis1.09 in27.7 mm
JTorsional constant2.33 in⁴96.98 cm⁴
Metric designationMC310×67

Also known as

MC310×67

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.