MC7×22.7 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC7×22.7 is an AISC MC shapes: miscellaneous channels channel. It is 7 in (177.8 mm) deep with a 3.6 in (91.4 mm) flange, a 0.503 in (12.8 mm) web and an average flange thickness of 0.5 in (12.7 mm), and weighs 22.7 lb/ft (33.8 kg/m). Area 6.67 in² (4,303 mm²); centroid 1.04 in (26.4 mm) from the back of the web; Ix = 47.4 in⁴ (1,972.9 cm⁴), Sx = 13.5 in³ (221.2 cm³).

dDepth
177.8 mm7 in7 in177.8 mm
bfFlange width
91.4 mm3.6 in3.6 in91.4 mm
twWeb thickness
12.8 mm0.503 in0.503 in12.8 mm
tfFlange thickness (average)
12.7 mm0.5 in0.5 in12.7 mm

Drawing

91.4 mm3.6 in177.8 mm7 intf 12.7 mmtf 0.5 intw 12.8 mmtw 0.503 ine 26.4 mme 1.04 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC7×22.7 specifications

dDepth7 in177.8 mm
bfFlange width3.6 in91.4 mm
twWeb thickness0.503 in12.8 mm
tfFlange thickness (average)0.5 in12.7 mm
kDesign value1.13 in28.7 mm
kDetailing value1 1/8 in28.6 mm
WWeight22.7 lb/ft33.8 kg/m
AArea6.67 in²4,303 mm²
x̄Centroid from back of web1.04 in26.4 mm
eoShear centre from web1.01 in25.7 mm
IxMoment of inertia, strong axis47.4 in⁴1,972.9 cm⁴
ZxPlastic modulus, strong axis16.4 in³268.7 cm³
SxSection modulus, strong axis13.5 in³221.2 cm³
rxRadius of gyration, strong axis2.67 in67.8 mm
IyMoment of inertia, weak axis7.24 in⁴301.4 cm⁴
ZyPlastic modulus, weak axis5.38 in³88.2 cm³
SySection modulus, weak axis2.83 in³46.4 cm³
ryRadius of gyration, weak axis1.04 in26.4 mm
JTorsional constant0.625 in⁴26.01 cm⁴
Metric designationMC180×33.8

Also known as

MC180×33.8

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.