C7×14.75 Channel Dimensions & Properties

C & MC Channels (AISC) · C shapes: American Standard channels

C7×14.75 is an AISC C shapes: American Standard channels channel. It is 7 in (177.8 mm) deep with a 2.3 in (58.4 mm) flange, a 0.419 in (10.6 mm) web and an average flange thickness of 0.366 in (9.3 mm), and weighs 14.8 lb/ft (22.0 kg/m). Area 4.33 in² (2,794 mm²); centroid 0.532 in (13.5 mm) from the back of the web; Ix = 27.2 in⁴ (1,132.1 cm⁴), Sx = 7.78 in³ (127.5 cm³).

dDepth
177.8 mm7 in7 in177.8 mm
bfFlange width
58.4 mm2.3 in2.3 in58.4 mm
twWeb thickness
10.6 mm0.419 in0.419 in10.6 mm
tfFlange thickness (average)
9.3 mm0.366 in0.366 in9.3 mm

Drawing

58.4 mm2.3 in177.8 mm7 intf 9.3 mmtf 0.366 intw 10.6 mmtw 0.419 ine 13.5 mme 0.532 in
Drawn to scale · Dimensions in mmDimensions in inches

C7×14.75 specifications

dDepth7 in177.8 mm
bfFlange width2.3 in58.4 mm
twWeb thickness0.419 in10.6 mm
tfFlange thickness (average)0.366 in9.3 mm
kDesign value0.875 in22.2 mm
kDetailing value7/8 in22.2 mm
WWeight14.8 lb/ft22.0 kg/m
AArea4.33 in²2,794 mm²
x̄Centroid from back of web0.532 in13.5 mm
eoShear centre from web0.441 in11.2 mm
IxMoment of inertia, strong axis27.2 in⁴1,132.1 cm⁴
ZxPlastic modulus, strong axis9.75 in³159.8 cm³
SxSection modulus, strong axis7.78 in³127.5 cm³
rxRadius of gyration, strong axis2.51 in63.8 mm
IyMoment of inertia, weak axis1.37 in⁴57 cm⁴
ZyPlastic modulus, weak axis1.63 in³26.7 cm³
SySection modulus, weak axis0.772 in³12.7 cm³
ryRadius of gyration, weak axis0.56 in14.2 mm
JTorsional constant0.267 in⁴11.11 cm⁴
Metric designationC180×22

Also known as

C180×22

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.