MC8×20 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC8×20 is an AISC MC shapes: miscellaneous channels channel. It is 8 in (203.2 mm) deep with a 3.03 in (77.0 mm) flange, a 0.4 in (10.2 mm) web and an average flange thickness of 0.5 in (12.7 mm), and weighs 20 lb/ft (29.8 kg/m). Area 5.87 in² (3,787 mm²); centroid 0.84 in (21.3 mm) from the back of the web; Ix = 54.4 in⁴ (2,264.3 cm⁴), Sx = 13.6 in³ (222.9 cm³).

dDepth
203.2 mm8 in8 in203.2 mm
bfFlange width
77.0 mm3.03 in3.03 in77.0 mm
twWeb thickness
10.2 mm0.4 in0.4 in10.2 mm
tfFlange thickness (average)
12.7 mm0.5 in0.5 in12.7 mm

Drawing

77.0 mm3.03 in203.2 mm8 intf 12.7 mmtf 0.5 intw 10.2 mmtw 0.4 ine 21.3 mme 0.84 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC8×20 specifications

dDepth8 in203.2 mm
bfFlange width3.03 in77.0 mm
twWeb thickness0.4 in10.2 mm
tfFlange thickness (average)0.5 in12.7 mm
kDesign value1.13 in28.7 mm
kDetailing value1 1/8 in28.6 mm
WWeight20 lb/ft29.8 kg/m
AArea5.87 in²3,787 mm²
x̄Centroid from back of web0.84 in21.3 mm
eoShear centre from web0.843 in21.4 mm
IxMoment of inertia, strong axis54.4 in⁴2,264.3 cm⁴
ZxPlastic modulus, strong axis16.4 in³268.7 cm³
SxSection modulus, strong axis13.6 in³222.9 cm³
rxRadius of gyration, strong axis3.04 in77.2 mm
IyMoment of inertia, weak axis4.42 in⁴184 cm⁴
ZyPlastic modulus, weak axis3.86 in³63.3 cm³
SySection modulus, weak axis2.02 in³33.1 cm³
ryRadius of gyration, weak axis0.87 in22.0 mm
JTorsional constant0.441 in⁴18.36 cm⁴
Metric designationMC200×29.8

Also known as

MC200×29.8

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.